深圳市汇通行润滑油有限公司
网站首页 关于我们 产品总汇 润滑油知识 工业油订购流程 在线订购 联系我们
快捷 高效 周到 贴心 全心全意为客户服务 销售热线:0755-27971019 传真:0755-27971089 手机:134 8078 1231李明
润滑油知识

Mobil SHC PM Series

发布时间:2013/3/22 浏览1617次 字体大小: 返回

Mobil SHC PM Series

Paper Machine Lubricants

Product Description

Mobil SHC PM Series products are supreme performance synthetic lubricants specifically designed for the most demanding industrial paper machine circulating systems. They are engineered to provide exceptional lubrication characteristics not attainable with conventional premium mineral oil-based fluids. The Mobil SHC PM Series oils are formulated to provide maximum protection of gears and bearings operating under the most severe conditions. They have very low pour points and a naturally high viscosity index (VI) which helps ensure good low temperature start-up while maintaining excellent viscosity characteristics at very high temperatures. The fluids are very shear stable and maintain viscosity control even when subjected to severe mechanical shear in heavily loaded bearings and gears. Their low traction coefficient and high viscosity index can help result in lower energy consumption and reduced component operating temperatures.

Mobil SHC PM Series oils are formulated with synthesised hydrocarbon fluid (SHF) base oil technology and a proprietary additive system carefully balanced to attain high performance standards These fluids permit the use of higher steam pressures, temperatures and machine speeds common in high output paper machines and calendar rolls. Their outstanding hydrolytic stability and filterability assure excellent performance in the presence of water and the ability to retain effective filtration even at very fine filtration levels. They readily separate water and retain their colour characteristics for extended periods of operation under severe conditions.

 

Features and Benefits

The Mobil SHC PM Series oils represent a technological advance in paper machine lubrication. Their excellent performance capabilities in the areas of wear protection, enhanced oxidation stability, chemical stability, effective rust and corrosion protection, colour stability, and filterability not only prolong maintenance service intervals but improve machine performance and increase production capacity. This can result in less required maintenance and longer equipment life.

Features Advantages and Potential Benefits
Excellent Wide Temperature Performance Easier start-up and improved lubrication at cold starts
Extra margin of protection at elevated temperatures
Better control of feed rates
Exceptional Wear Protection Improved bearing and gear performance
Outstanding Oxidation and Thermal Stability Longer oil life
Lower filter replacement costs
Cleaner systems
Reduction of system deposits
Effective Water Separation Properties Allows easier removal of water
Reduces formation of undesirable emulsions in systems
Low Traction Coefficient Reduced energy consumption
Lower operating temperatures
Reduced wear
Excellent Filterability Keeps oil lines and flow control mechanisms free of deposits
Improved oil flow and cooling performance
Lowers filter replacement costs
High Level Rust and Corrosion Protection Protects gears and bearings in wet environments
Provides vapour space protection for areas of bearing and gear cavities above normally wetted surfaces

 

Applications

  • Lubrication of severe industrial paper machine circulating systems
  • Application involving circulation systems operating over a wide temperature range such as calendar rolls
  • Systems that must be started and brought on line quickly
  • Circulation systems lubricating gears and bearings

 

Specifications and Approvals

Mobil SHC PM Series meets or exceeds the requirements of: Mobil SHC PM 220
FAG PM Oils for dryer section (OHT-F-S) X
SKF PM Oils for dryer section X

 

Typical Properties

Mobil SHC PM Series 150 220 320 460
ISO Viscosity Grade 150 220 320 460
Viscosity, ASTM D 445        
cSt @ 40º C 158 225 325 465
cSt @ 100º C 18.9 25.6 34.7 44.8
Viscosity Index, ASTM D 2270, typical 124 127 130 137
FZG 4-Square Load Support, DIN 51354, fail stage 11 11 11 11
Rust Characteristics, Proc A and B, ASTM D 665 Pass Pass Pass Pass
Hydrolytic Stability (Acid Number Change),ASTM D 2619, mgKOH/g 0 0 0 0
Copper Strip Corrosion, 24h @ 100º C, ASTM D 130, rating 1B 1B 1B 1B
Demulsibility, minutes to 40/40/0, 82º C 15 25 30 30
Pour Point, ºC, ASTM D 97, max -39 -36 -33 -27
Flash Point, ºC, ASTM D 92, min 220 220 220 220
Specific Gravity 15º C/15º C, ASTM D 1298 0.857 0.863 0.865 0.874

 

Health and Safety

Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.


The Mobil logotype, the Pegasus design are trademarks of Exxon Mobil Corporation, or one of its subsidiaries. 

4-2011 

Copyright © 2001-2013 Exxon Mobil Corporation. All rights reserved..

上一条: 壳牌润滑脂-怎么正确选择润滑脂
下一条: The Upgraded Mobil SHC™ 600 Series
热门知识
 国好富顿集团斯图尔特石油
 Blaser Blasocut Kombi,Blaser Sorepi-LM ,Blaser Swisslube AG
 美国加德士工业润滑油
 MOBIL SHC150/220/320/460/680/1000/1500/3200/6800
版权所有:深圳市汇通行润滑油有限公司 网站备案:粤ICP备16124526号 网址:www.hthrhy.com 邮箱:hthrhy@126.com
电话:0755-27971019 传真:0755-27971089 手机:134 8078 1231李明 地址:深圳市南山区科技园高新南一路中科大夏