ANDEROL 783-0
Synthetic Food-Grade Grease NLGI-0 Product Data Sheet
ANDEROL 783-0 is a synthetic hydrocarbon (PAO) based aluminium complex thickend
grease designed for use in food processing machinery. It is a non-toxic, high quality generalpurpose grease and can satisfy a wide variety of applications, even under high temperatures,
high loads and water exposure. This product is NSF registered as H1 for use in applications
where incidental food contact can occur.
APPLICATIONS / ADVANTAGES REGISTRATIONS / APPROVAL HANDLING AND STORAGE
• Lubrication of roller and friction bearings in
food and beverage, cosmetic and
pharmaceutical industry
• High temperatures, high loads and water
exposure
• High quality general-purpose food grade
grease
• Grease lubricated points in can seaming
and bottling
• Excellent wear protection
• Prevents Rusting
• Good mechanical stability
ANDEROL Lubricants are approved,
recommended and field tested by many OEM’s
in the food processing, bottling, canning, meat
processing, and pharmaceutical industries.
ANDEROL and PQ Food Grade Lubricants are
registered by NSF International (www.nsf.org)
and meet USDA 1998 Guidelines. ANDEROL
Food Grade lubricants also meet the
certification requirements recommended by the
National Lubricating Grease Institute (NLGI)
and the European Lubricating Grease Institute
(ELGI)
ANDEROL Lubricants generally present little
hazard in normal handling if ordinary care is
exercised. If spilled, cover with inert,
absorbent material and remove. Flush the
area with water.
Although ANDEROL Lubricants are not highly
flammable, they will burn and should be kept
away from open flames. In case of fire, use
water spray, foam, carbon dioxide, or dry
chemical.
ANDEROL Lubricants should be stored
preferably in protected locations to prevent
contamination. Do not re-use drums; flush
and send to re-conditioner.
FOR MORE INFORMATION PLEASE REFER TO THE RELEVANT MATERIAL SAFETY DATA SHEET
APPROVALS / REGISTRATIONS
ANDEROL BV
Punterweg 21 A
6222 NW MAASTRICHT
The NETHERLANDS
Tel No.: +31 (0)43 352 41 90
Fax No.: +31 (0)43 352 41 99
www.anderol-europe.com
This information is furnished without warranty, representation, inducement, or license of any kind except that it is accurate to the best of OUR knowledge or obtained from sources believed by
ANDEROL to be accurate. ANDEROL does not assume any legal responsibility for use of reliance upon it. Only Chemists or chemically qualified lab technicians should carry out tests. Before using any
chemicals, read its label and Material Safety Data Sheet.
PROPERTIES TEST METHOD ANDEROL 783-0
Thickener
Color
Type of Base Oil
Operating temperature for long-term lubrication
Short time admissible temperature peak value
Dropping Point
Worked Penetration
Base Oil Viscosity at 40° C
Water resistance
Corrosion Protection
4 Ball-test welding load
Designation
Designation
ASTM D-2265
ASTM D-217
ASTM D-445
DIN 51.807-01
IP 220/85
DIN 51.350
DIN 51.502
ISO 6473
Al-complex
White
Synthetic (PAO)
-45 to +160° C
+200° C
>250° C
355 to 385
350mm²/s
0-90
Corrosion degree 0/0
2600 N
GPFHC 0 P-40
XEEHB0 |
