ANDEROL 755
Synthetic Compressor Lubricant Product Data Sheet
PROPERTIES TEST METHOD ANDEROL 755
Appearance @ 20°C
Viscosity @ 40°C, cSt
Viscosity @ 100°C, cSt
Viscosity Index
Density @ 15°C, kg/l
Total Acid Number, mg KOH/g
Flash Point, °C
Pour Point, °C
Demulsibility @ 82°C,min
Sulphated ash
Air release, min
% CRC of 20% dest
Carbon conradson residue, %
Evaporation loss, %
visual
ASTM D-445
ASTM D-445
ASTM D-2270
ASTM D-1298
ASTM D-664
ASTM D-92
ASTM D-97
ASTM D-1401
DIN 51575
ASTM D-3427
DIN 51536
ASTM D-189
ASTM D-972
Clear Yellow Liquid
136.3
12.6
81
0.964
0.05
264
-39
10
0.011
3.2
0.098
0.1
0.3
APROVALS / REGISTRATIONS
ANDEROL 755 is an ISO 150 synthetic diester based compressor lubricant specifically
designed to provide long-term lubrication in air and process gas compressors.
ANDEROL 755 meets or exceeds the following specifications:
DIN 51506 VDL, ISO 6743-3 L-DVC
ADVANTAGES / BENEFITS COMPATIBILITY APPLICATION
No metal additives to interfere with catalytic
processes
● Fewer oil changes
● Reduces compressor maintenance
● Greatly reduces fire and explosion
hazard
● Separates water condensate rapidly
● Lower oil consumption
● Eliminates lacquering and deposits
Reduces energy consumption
The following seals, paints and plastics are
recommended for use in contact with
Anderol synthetic lubricants. Materials not
recommended are also shown. For more
information on other materials see our
‘Compatibility Guide’.
RECOMMENDED:
Viton, High Nitrile Buna N, Teflon, Epoxy
Paint, Oil-Resistant Alkyd, Nylon, Delrin,
Celcon, PBT
NOT RECOMMENDED:
Neoprene, SBR Rubber, Low Nitrile Buna
N, Acrylic Paint, Lacquer, Polystyrene,
PVC, ABS
FOR MORE INFORMATION PLEASE REFER TO THE RELEVANT MATERIAL SAFETY DATA SHEET
This information is furnished without warranty, representation, inducement, or license of any kind except that it is accurate to the best of OUR knowledge or obtained from sources believed by
ANDEROL to be accurate. ANDEROL does not assume any legal responsibility for use of reliance upon it. Only Chemists or chemically qualified lab technicians should carry out tests. Before using any
chemicals, read its label and Material Safety Data Sheet.
ANDEROL BV
Punterweg 2 |
