ANDEROL 86 EP-2 GREASE
Calcium Sulfonate Complex Grease NLGI-2 Product Data Sheet
ANDEROL 86 EP-2 is an over-based Calcium Sulfonate based grease with exceptional
load carrying ability, excellent mechanical stability and good resistance to oxidation and
corrosion.
ANDEROL 86 EP-2 equals or outperforms many other premium greases in high-speed
applications.
APPLICATIONS / ADVANTAGES REGISTRATIONS / APPROVAL HANDLING AND STORAGE
Superior mechanical stability, particularly in
the presence of heat and water
Formulated to resist separation under
centrifugal forces.
Excellent rust prevention properties.
Excellent load carrying ability and wear
protection
Excellent resistance to water washout and
spray-off.
Suitable grease for high speed bearings.
Suitable for automotive and truck wheel
bearings and chassis components.
Excellent Electric Motor bearing Grease.
Heavy duty industrial applications, e.g.
Steel Mills.
ANDEROL lubricants Exceeds the
requirements for NLGI GC/LB certification for
use in automotive and truck wheel bearings
and chassis components.
ANDEROL lubricants generally present little
hazard in normal handling if ordinary care is
exercised. If spilled, cover with inert,
absorbent material and remove. Flush the
area with water.
Although ANDEROL lubricants are not highly
flammable, they will burn and should be kept
away from open flames. In case of fire, use
water spray, foam, carbon dioxide, or dry
chemical.
ANDEROL lubricants should be stored
preferably in protected locations to prevent
contamination. Do not re-use drums; flush
and send to re-conditioner.
FOR MORE INFORMATION PLEASE REFER TO THE RELEVANT MATERIAL SAFETY DATA SHEET
APPROVALS / REGISTRATIONS
ANDEROL BV
Punterweg 21 A
6222 NW MAASTRICHT
The NETHERLANDS
Tel No.: +31 (0)43 352 41 90
Fax No.: +31 (0)43 352 41 99
www.anderol-europe.com
This information is furnished without warranty, representation, inducement, or license of any kind except that it is accurate to the best of OUR knowledge or obtained from sources believed by
ANDEROL to be accurate. ANDEROL does not assume any legal responsibility for use of reliance upon it. Only Chemists or chemically qualified lab technicians should carry out tests. Before using any
chemicals, read its label and Material Safety Data Sheet.
PROPERTIES TEST METHOD ANDEROL 86 EP-2
Thickener
Color
Type of Base Oil
Operating temperature for long-term lubrication
Short time admissible temperature peak value
Dropping Point
Worked Penetration
Base Oil Viscosity at 40° C
4-ball weld load
Water Washout at 80° C
Bearing Life performance, 1000 rpm, 160° C
Low Temperature Torque at -40° C
Designation
DIN ISO 2176
DIN ISO 2137
DIN 51.562
ASTM D-2596
ASTM D-1264
ASTM D-3527
ASTM D-4693
DIN 51.502
Ca-Sulfonate
Brown
Mineral
-20 to +160° C
+200° C
318° C
265 to 295 0.1 mm
Approx. 135 mm²/s
5000 N
0.5% removed
100 hours
12.0 Nm
KP 2 U |
