ANDEROL 3150
Synthetic Compressor Lubricant Product Data Sheet
ANDEROL 3150 is an ISO 150 compressor lubricant based on synthetic esters and
synthetic hydrocarbon (PAO) with a specially developed additive system providing
excellent oxidative and thermal stability
ANDEROL 3000 range is available in the grades ISO VG 32, 46, 57, 68, 100 and 150.
ADVANTAGES / BENEFITS COMPATIBILITY APPLICATION
ANDEROL synthetic lubricants are the only
long-life synthetic lubricant with over 60 years
of successful performance.
Fewer oil changes
Increases maintenance intervals
Separates water condensate rapidly
Lower oil consumption
Eliminates lacquering and deposits
Reduces energy consumption
The following seals, paints and plastics are
recommended for use in contact with Anderol
Company synthetic lubricants. Materials not
recommended are also shown. For more
information on other materials see our
‘Compatibility Guide’.
RECOMMENDED:
Viton, High Nitrile Buna N, Teflon, Epoxy Paint,
Oil-Resistant Alkyd, Nylon, Delrin, Celcon, PBT
NOT RECOMMENDED:
Neoprene, SBR Rubber, Low Nitrile Buna N,
Acrylic Paint, Lacquer, Polystyrene, PVC, ABS
Lubrication of piston and vane compressors,
or any other application requiring an oxidation
resistant lubricant
ANDEROL 3150 can be used in the presence
of following gasses:
Air
Carbon Monoxide
Carbon Dioxide (dry)
Ethylene
Helium
Hydrogen
Natural gas
Methane
Nitrogen
Propane
Butadiene
FOR MORE INFORMATION PLEASE REFER TO THE RELEVANT MATERIAL SAFETY DATA SHEET
APPROVALS / REGISTRATIONS
ANDEROL BV
Punterweg 21 A
6222 NW MAASTRICHT
The NETHERLANDS
Tel No.: +31 (0)43 352 41 90
Fax No.: +31 (0)43 352 41 99
www.anderol-europe.com
This information is furnished without warranty, representation, inducement, or license of any kind except that it is accurate to the best of OUR knowledge or obtained from sources believed by
ANDEROL to be accurate. ANDEROL does not assume any legal responsibility for use of reliance upon it. Only Chemists or chemically qualified lab technicians should carry out tests. Before using any
chemicals, read its label and Material Safety Data Sheet.
PROPERTIES TEST METHOD ANDEROL 3150
Appearance @ 20°C
Viscosity @ 40°C, cSt
Viscosity @ 100°C, cSt
Viscosity Index
Density @ 15°C, kg/l
Total Acid Number, mg KOH/g
Flash Point, °C
Pour Point, °C
Demulsibility @ 82°C,min
visual
ASTM D-445
ASTM D-445
ASTM D-2270
ASTM D-1298
ASTM D-664
ASTM D-92
ASTM D-97
ASTM D-1401
Clear Yellow Liquid
137
16
1 |
