CASTROL TRIBOL 800/1000

官方网站：http://www.castrol.com/liveassets/bp_internet/castrol/castrol_advantage/STAGING/local_assets/downloads/t/tribol_800_eu_tds.pdf
Synthetic gear oils
DESCRIPTION
CASTROL TRIBOL?800 gear oils were developed for application in highly loaded gears and bearings even
when subjected to high operating conditions.
They differ from mineral oil-based gear oils in the following characteristics:
? they feature an excellent oxidation stability (even at high temperatures)
? outstanding viscosity-temperature stability and extremely high viscosity-index without using VI improvers
? they are manufactured from high-quality polyglycol base oils
? CASTROL TRIBOL?800 synthetic gear oils are available in the viscosity grades 100 to 1000
APPLICATION
? The excellent properties of CASTROL TRIBOL?800 synthetic gear oils are especially evident in the
lubrication of mechanically and/or thermally highly loaded friction surfaces.
? They are especially suited for service in highly loaded enclosed gear drives (spur, helical, bevel and worm
gears), the lubrication of rolling and sliding bearings in paper machines, PVC calanders, kneaders,
extruders and mills.
? Temperature Range: Sustained oil reservoir temperatures up to + 140癈/285癋, with short-time exposure
to peak temperatures up to 200癈/390癋.
ADVANTAGES
? Considerable decrease in maintenance costs due to a prolonged service life of lubricant and machine
parts (owing to the high oxidation resistance an extremely extended service life of mineral oils is
guaranteed)
? The good viscosity-temperature behavior ensures the formation of a load-resistant lubricating film on the
friction surfaces over a wide temperature range thus offering an optimum wear protection.
? Critical mixed-friction areas are easily coped with due to the efficiency of EP additives. These operating
conditions prevail under extremely high loads (e.g. shock loads), 搒top-and-go?operations as well as at
slow rolling and sliding speeds under high loads.
? Excellent corrosion protection and good foaming behavior.
? Compatibility with non-ferrous metals is guaranteed by appropriate additives.
? CASTROL TRIBOL?800 is classified according to API GL5 with regards to seizure.
NOTES FOR USE
? CASTROL TRIBOL?800 synthetic gear oils are not compatible with mineral oils. Therefore a thorough
cleaning of gearboxes, bearings and oil reservoirs are recommended.
? Condensation water may be absorbed without the danger of corrosion or a change in viscosity.
? CASTROL TRIBOL?800 synthetic gear oils are compatible with seals, e.g. NBR, FPM (other materials
on request).
? They are compatible with nearly all conventional one-component and two-component lacquers.
? Quality standard: CASTROL TRIBOL?800 synthetic gear oils are CLP-PG oils (acc. to DIN 51502) and
exceed the minimum requirements according to DIN 51517, T. 3 for CLP gear oils
Castrol
Wakefield House
Aspect Park
Pipers Way
Swindon
SN3 1RE
United Kingdom
Tel +44 (0)1793 452111
Fax +

Technical data
Unit Value Test
method
TRIBOL 800 - 800/100 800/150 800/220 800/320 800/460 800/680 800/1000 -
ISO viscosity grade - 100 150 220 320 460 680 1000 DIN 51519
Density at + 15°C kg/m3 1050 1056 1070 1074 1075 1075 1074 DIN 51757
Viscosity at + 40°C
+ 100°C
mm2/s 100
20
150
26
220
34
320
50
460
72
680
112
1000
152
DIN 51550
Viscosity index - 205 210 215 230 240 260 275 DIN ISO 2909
Flash point °C 280 280 290 290 290 290 300 DIN ISO 2592
Pour point °C - 42 - 36 - 33 - 30 - 30 - 27 - 24 DIN ISO 3016
Corrosion test, test A
(dist. water)
- 0 DIN
51585
Copper corrosion test
(corrosion degree 100 A3)
- 1 DIN EN ISO
2160
Four ball weld load N 1600/
1800
1600/
1800
1600/
1800
1800/
2000
1800/
2000
1800/
2000
1800/
2000
DIN 51350-02
Four ball wear test Wear
scar diameter
mm 0.27 DIN 51350-
03-B
FZG test, (A/8.3/90),
damage load stage
- > 12 DIN 51354
FZG shock-load test (SA10/
16.6R/90)
Scoring load stage
9 -
FZG micropitting test
Micropitting load carrying
capacity:
- 10 FVA No. 54
Foaming stability
Sequence I
Sequence II
Sequence III
ml 0
50/0
0
ISO 51566
1 mm2/s ^ 1cSt
These technical data are based on average test results. Minor deviations may occur from case to case.
For further product information please contact the Technical Service of Castrol Industrie GmbH.