WYROL BG320
| 美孚WYROL BG 460详细说明 （浏览3次） |
WYROL BG
轴承和齿轮油
产品描述
WYROL BG系列高性能合成低着色轴承和齿轮油，设计用于轧机。由于其低的染色的倾向，它们是特别适合于使用在有色金属的轧制机的应用。他们制定了与低染色合成成分，确保有足够的润滑提供重型轴承和齿轮单元的条件。他们的低着色特性，确保质量不被削弱，通过金属轧辊冷却系统泄漏到。这将确保一个最佳的生活质量得到从轧辊冷却液，这降低了维护和总成本。WYROL BG油品具有良好的抗磨损和承载性能和保护重仓的齿轮和轴承的损坏和磨损。WYROL BG油还具有优异的氧化稳定性和防腐蚀特性。
特点和优点
WYROL BG油是专门设计来克服这些问题的产生时，传统的轴承润滑油污染的辊子油和成品染色结果。他们还提供优异的润滑特性，以减少磨损，提高设备的使用寿命。其优良的化学稳定性，允许延长服务时间，降低维护成本。WYROL BG油具有以下优点：
- 可接受的材料非常低的染色性能提高生产
- 较低的scrapage费率
- 改进的轧辊冷却液的使用寿命和更低的维护成本
- 良好的抗磨损和承载特性增加轴承和齿轮寿命
- 高氧化稳定性提高油品使用寿命
应用
与传统的矿物油和转换这些液体WYROL BG油是不相容的，需要彻底冲洗和清洁，之前，添加BG WYROL油。请咨询您当地的营销技术代表建议有关转换程序。
- 在铝轧机应用的轴承和齿轮润滑
- 他们是适合的飞溅和油雾润滑系统
典型属性
| Wyrol BG |
220 |
320 |
460 |
| 在15ºC，ASTM D 4052 kg/m3的密度 |
1007 |
1007 |
1007 |
| 运动粘度在40ºC，平方毫米/秒，ISO 3104 |
235 |
320 |
480 |
| 运动粘度在100°C，平方毫米/秒，ISO 3104 |
32 |
45 |
63 |
| 倾点，ºC，ISO 3016 |
-30 |
-30 |
-27 |
| ISO 2592ºC，闪点，COC， |
275 |
275 |
275 |
| 铜片腐蚀，3H，100ºC，评级，ISO 2160 |
1 |
1 |
1 |
| 防锈，蒸馏水，ISO 7120 |
通过 |
通过 |
通过 |
健康与安全
根据现有资料显示，该产品预计不会对健康产生不利影响，使用时的用途和材料安全数据表（MSDS）中提供的建议遵循。MSDS可根据要求通过你的销售合同办公室，或通过互联网。此产品不应该被用于其拟定用途以外的其他用途。如果处理用过的产品，照顾，以保护环境。
美孚字型，飞马设计和美孚Wyrol BG是埃克森美孚公司或其子公司之一，其附属公司的注册商标。
版权所有©2001-2013埃克森美孚公司。保留所有权利。
|
Bearing and Gear Oil
Product Description
WYROL BG Series are high performance synthetic low staining bearing and gear oils designed for use in rolling mills. Due to their low staining tendency, they are particularly suitable for use in non-ferrous rolling mill applications. They are formulated with low staining synthetic ingredients that ensure adequate lubrication is provided for heavy-duty bearing and gear unit conditions. Their low staining characteristics ensure that the quality of rolled metal is not impaired through leakage into roll coolant systems. This will ensure an optimum life and quality is obtained from the roll coolant; this reduces maintenance and overall costs. WYROL BG oils have good anti-wear and load-carrying performance and protect heavily loaded gears and bearings from damage and wear. WYROL BG oils also exhibit excellent oxidation stability and corrosion prevention properties.
Features and Benefits
WYROL BG oils are specifically designed to overcome the problems generated when conventional bearing lubricating oils contaminate the roll oils and result in finished product staining. They also provide excellent lubrication characteristics to reduce wear and improve equipment service life. Their excellent chemical stability allows extended service intervals and reduced maintenance costs.
WYROL BG oils offer the following benefits:
- Very low staining properties improve the production of acceptable materials
- Lower scrapage rates
- Improved roll coolant life and lower maintenance costs
- Good anti-wear and load-carrying characteristics increase bearing and gear life
- High oxidation stability increases oil service life
Applications
WYROL BG oils are incompatible with conventional mineral oils and changeover to these fluids require thorough flushing and cleaning before adding WYROL BG oils. Consult your local Marketing Technical Representative for advise concerning changeover procedures.
- Bearing and gear lubrication in aluminium rolling mill applications
- They are suitable for splash and mist lubrication systems
Typical Properties
| Wyrol BG |
220 |
320 |
460 |
| Density at 15ºC, kg/m3, ASTM D 4052 |
1007 |
1007 |
1007 |
| Kinematic Viscosity at 40ºC, mm2/s, ISO 3104 |
235 |
320 |
480 |
| Kinematic Viscosity at 100ºC, mm²/s, ISO 3104 |
32 |
45 |
63 |
| Pour Point, ºC, ISO 3016 |
-30 |
-30 |
-27 |
| Flash Point, COC, ºC, ISO 2592 |
275 |
275 |
275 |
| Copper Corrosion, 3h, 100ºC, rating, ISO 2160 |
1 |
1 |
1 |
| Rust Prevention, distilled water, ISO 7120 |
Pass |
Pass |
Pass |
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.
The Mobil logotype, the Pegasus design and Mobil Wyrol BG are trademarks of Exxon Mobil Corporation, or one of its subsidiaries.
Copyright © 2001-2013 Exxon Mobil Corporation. All rights reserved.
