美孚MB 2

汽车用润滑脂

产品描述

美孚MB 2多用途应用在商用车和乘用车汽车锂增稠润滑脂。它是基于矿物油的粘度接近180厘斯。该产品具有优异的氧化稳定性和非常良好的耐水性。它还提供了优异的防腐性能和良好的流动性，即使在低温下。

美孚MB 2，符合梅赛德斯 - 奔驰第267页。

美孚MB图2是制成的NBR，ACM，FKM，只要这些适合的工作温度与密封件相容。

特点和优点

特点	优点及潜在效益
可以用在各种各样的汽车应用	理顺产品的潜力
使用寿命长	降低运营成本降低维护成本和经济使用
良好的抗氧化和热稳定性	良好的设备的可靠性和可用性
优异的防锈蚀和腐蚀以及抗水淋	增强设备的保护和良好的润滑作用，即使在有水存在
集中式系统在低温泵送性好，	最佳的可靠性
良好的机械稳定性，即使在高剪切速率	维修保养周期更长

应用

美孚MB 2可用于许多汽车应用。它可以用来作为一个单一的多用途润滑脂，在车队，农业和建筑设备MB第267页的规范已被推荐。美孚MB 2也可以用在某些工业应用中，一个非EP润滑脂适用。该产品具有高速轴承约200,000 DMN因素。

规格与认可

美孚MB 2达到或超过以下行业规格：
DIN 51825：（2004-06）	KP2K-30

美孚MB 2具有以下制造商认可：
267.0 MB审批	X
MAN 283李-P 2	X

典型属性

美孚MB 2
NLGI等级	2
基础油粘度40°C，ASTM D 445，CST	180
稠化剂类型	锂
颜色	棕色
工作锥入度，25ºC，ASTM D 217度，0.1mm×60
滴点，°C，ASTM D 2265	> 190
四球焊接负荷，N，DIN 51350-4	2600
静电放油（168小时@ 40°C），％质量，DIN 51817	6.5
防锈保护，EMCOR测试，评分，ISO 11007	0
流量压力测试@ -30°C，百帕，DIN 51805	<1400

健康与安全

根据现有资料显示，该产品预计不会对健康产生不利影响，使用时的用途和材料安全数据表（MSDS）中提供的建议遵循。MSDS可根据要求通过你的销售合同办公室，或通过互联网。此产品不应该被用于其拟定用途以外的其他用途。如果处理用过的产品，照顾，以保护环境。

美孚字型，飞马图样及美孚，埃克森美孚公司或其子公司之一，其附属公司的注册商标。

11-2012

埃索ITALIANA SRL
通过城堡德拉妮拉25
00148，罗马，意大利 800.011723 http://www.exxonmobil.com

典型性质是典型的获得正常生产公差，并不构成一个规范。在正常生产过程中，在不同的调配是可以预期的变动，并不影响产品性能。此处包含的信息如有变更，恕不另行通知。可能并非所有产品均在当地有售。欲了解更多信息，请联系您当地的埃克森美孚接触或访问www.exxonmobil.com
埃克森美孚公司是由众多的子公司和附属公司，包括埃索，美孚，埃克森美孚公司的名称。本文档中的任何内容都不是为了覆盖或取代地方实体的公司的独立性。地方行动和问责的责任仍然与当地埃克森美孚附属实体。

Mobilgrease MB 2

Automotive Grease

Product Description

Mobilgrease MB 2 is a lithium thickened grease for multi purpose applications in commercial and passenger vehicle cars. It is based on mineral oil with a viscosity close to 180 cSt. The product has excellent oxidation stability and very good water resistance. It also offers excellent corrosion protection and good flow properties even at low temperatures.

Mobilgrease MB 2 conforms to Mercedes Benz page 267.

Mobilgrease MB 2 is compatible with seals made of NBR, ACM and FKM, as long as these are suitable for the operating temperatures.

Features and Benefits

Features	Advantages and Potential Benefits
Can be used in a wide variety of automotive applications	Potential to rationalise products
Long service life	Reduced operating costs from lower maintenance costs and economic usage
Good oxidation and thermal stability	Good equipment reliability and availability
Excellent protection against rust and corrosion and resistance to water washout	Enhanced equipment protection and good lubrication even in presence of water
Good pumpability in centralised systems at low temperatures	Optimum reliability
Good mechanical stability even at high shear rate	Longer service intervals

Applications

Mobilgrease MB 2 can be used for many automotive applications. It can be used as a single multi purpose grease in fleets, agricultural and construction equipment where MB page 267 specification has been recommended. Mobilgrease MB 2 can also be used in some industrial applications where a non EP grease is suitable. The product has a speed bearing factor of approximately 200,000DmN.

Specifications and Approvals

Mobilgrease MB 2 meets or exceeds the following industry specifications:
DIN 51825: (2004-06)	KP2K-30

Mobilgrease MB 2 has the following builder approvals:
MB-Approval 267.0	X
MAN 283 Li-P 2	X

Typical Properties

Mobilgrease MB 2
NLGI Grade	2
Base Oil Viscosity @ 40°C, cSt, ASTM D 445	180
Thickener Type	Lithium
Colour	Brown
Penetration, Worked×60, 25 ºC, 0.1mm, ASTM D 217
Dropping Point, °C, ASTM D 2265	›190
4-Ball Weld Load, N, DIN 51350-4	2600
Static oil release (168hrs @ 40°C), % mass, DIN 51817	6.5
Rust protection, Emcor test, rating, ISO 11007	0
Flow pressure test @ -30°C, hPa, DIN 51805	‹1400

Health and Safety

Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.

The Mobil logotype, the Pegasus design and Mobilgrease are trademarks of ExxonMobil Corporation, or one of its subsidiaries.

11-2012

Esso Italiana s.r.l.
Via Castello della Magliana 25
00148, Roma, Italia

800.011723
http://www.exxonmobil.com

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification. Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations. The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.