ANDEROL PQAA 46
H1 Food Grade Lubricant Product Data Sheet
ANDEROL PQAA-46 is a white oil based H1 registered general purpose lubricant, combined with
high performance additives. It meets most general purpose requirements of machinery.
Anderol PQAA range is available in the grades ISO VG 32 , 46 , 68 , 100 & 150 .
ANDEROL PQAA-46 is NSF/H1 and InS/H1 registered. The product is certified Kosher by the
Orthodox Union and Halal by the Islamic Food Council of Europe.
ANDEROL Food Grade Lubricants meet the requirement of the FDA regulation 21 CFR
178.3570
ADVANTAGES / BENEFITS COMPATIBILITY APPLICATIONS
Product was developed with highly stable
white oil
Product has excellent wear and load
carrying capacity
Rust and oxidation inhibited
Good water separation
ANDEROL white oil based lubricants are
similar to mineral oils in their compatibility
with paints, seals, gaskets and hoses. No
special precautions related to compatibility
are required when changing over from a
mineral oil lubricant to this product.
H1 Food Approved general purpose lubricant
suitable for food manufacturing applications
where incidental food contact may occur.
Recommended for use in:
Hydraulic systems and slide ways
Vacuum pumps and compressors
Chain lubrication
Bearings and gears
Wipe down oil
Can generally be used in all other rotating
equipment applications
FOR MORE INFORMATION PLEASE REFER TO THE RELEVANT MATERIAL SAFETY DATA SHEET
APPROVALS / REGISTRATIONS
ANDEROL BV
Punterweg 21 A
6222 NW MAASTRICHT
The NETHERLANDS
Tel No.: +31 (0)43 352 41 90
Fax No.: +31 (0)43 352 41 99
www.anderol-europe.com
This information is furnished without warranty, representation, inducement, or license of any kind except that it is accurate to the best of OUR knowledge or obtained from sources believed by
ANDEROL to be accurate. ANDEROL does not assume any legal responsibility for use of reliance upon it. Only Chemists or chemically qualified lab technicians should carry out tests. Before using any
chemicals, read its label and Material Safety Data Sheet.
PROPERTIES TEST METHOD ANDEROL PQAA 46
Appearance @ 20°C
Viscosity @ 40°C, cSt
Viscosity @ 100°C, cSt
Viscosity Index
Density @ 15°C, kg/l
Total Acid Number, mg KOH/g
Flash Point, °C
Pour Point, °C
Demulsibility @ 54°C,min
Visual
ASTM D-445
ASTM D-445
ASTM D-2270
ASTM D-1298
ASTM D-664
ASTM D-92
ASTM D-97
ASTM D-1401
Clear to slightly hazy liquid
46.8
6.9
104
0.868
0.5
208
-9
2 |
