ANDEROL PQAA 220
H1 Food Grade Gear Lubricant Product Data Sheet
ANDEROL PQAA-220 is a white oil based H1 registered gear lubricant, combined with high
performing additives. It meets the lubrication requirements of gears running in food processing
plants.
ANDEROL PQAA range is available in the grades ISO VG 220 & VG 320 .
ANDEROL PQAA-220 is NSF/H1 and InS/H1 registered. The product is certified Kosher by the
Orthodox Union and Halal by the Islamic Food Council of Europe.
ANDEROL Food Grade Lubricants meet the requirement of the FDA regulation 21 CFR
178.3570
ADVANTAGES / BENEFITS COMPATIBILITY APPLICATIONS
Product was developed with highly stable
white oil
Product has excellent wear and load
carrying capacity
Rust and oxidation inhibited
Good water separation
ANDEROL white oil based lubricants are
similar to mineral oils in their compatibility with
paints, seals, gaskets and hoses. No special
precautions related to compatibility are required
when changing over from a mineral oil lubricant
to this product.
Recommended for use in gear applications.
All general gear systems, chain applications
and bearings. Can generally be used in all
other rotating equipment applications where
incidental food contact may occur.
FOR MORE INFORMATION PLEASE REFER TO THE RELEVANT MATERIAL SAFETY DATA SHEET
APPROVALS / REGISTRATIONS
ANDEROL BV
Punterweg 21 A
6222 NW MAASTRICHT
The NETHERLANDS
Tel No.: +31 (0)43 352 41 90
Fax No.: +31 (0)43 352 41 99
www.anderol-europe.com
This information is furnished without warranty, representation, inducement, or license of any kind except that it is accurate to the best of OUR knowledge or obtained from sources believed by
ANDEROL to be accurate. ANDEROL does not assume any legal responsibility for use of reliance upon it. Only Chemists or chemically qualified lab technicians should carry out tests. Before using any
chemicals, read its label and Material Safety Data Sheet.
PROPERTIES TEST METHOD PQAA 220
Appearance @ 20°C
Viscosity @ 40°C, cSt
Viscosity @ 100°C, cSt
Viscosity Index
Density @ 15°C, kg/l
Total Acid Number, mg KOH/g
Flash Point, °C
Pour Point, °C
Demulsibility @ 82°C,min
Four ball wear,1200 rpm,75°C,40 kg
Four ball weld,kg
visual
ASTM D-445
ASTM D-445
ASTM D-2270
ASTM D-1298
ASTM D-664
ASTM D-92
ASTM D-97
ASTM D-1401
ASTM D-4172
ASTM D-2783
Clear to slightly Hazy Yellow Liquid
204.6
19.6
109
0.876
1.3
222
-18
15
0.4
160 |
