ANDEROL PG Supreme 46
High Performance Compressor Lubricant Product Data Sheet
ANDEROL PG Supreme 46 is a blend of premium synthetic oils specially formulated for rotary screw
air compressors that use a synthetic blend of polyglycol (PAG) and polyolester (POE) base stocks.
ANDEROL PG Supreme 46 employs a proprietary additive package specifically
formulated for rotary compressors operating at high air pressures and discharge
temperatures.
These formulations do not contain barium containing additives.
ADVANTAGES / BENEFITS COMPATIBILITY APPLICATION
● Fewer oil changes
● High and low temperature operations
● Low pour point
● High VI - wide temperature range
● Low coefficient of friction
● Excellent anti-wear properties
● Rust and oxidation inhibited
● Good water separation
ANDEROL PG Supreme is compatible with
the following seal and elastomeric materials:
Viton, High Nitrile Buna N, Nylon, Delrin,
Celcon, PBT, Oil resistant Alkyd, Teflon.
Recommended for use in oil-flooded
rotary screw compressors that specify a
polyglycol based lubricant.
Drop-in replacement for compressors
presently using OEM-type PAG/POE oils.
FOR MORE INFORMATION PLEASE REFER TO THE RELEVANT MATERIAL SAFETY DATA SHEET
APPROVALS / REGISTRATIONS
ANDEROL BV
Punterweg 21 A
6222 NW MAASTRICHT
The NETHERLANDS
Tel No.: +31 (0)43 352 41 90
Fax No.: +31 (0)43 352 41 99
www.anderol-europe.com
This information is furnished without warranty, representation, inducement, or license of any kind except that it is accurate to the best of OUR knowledge or obtained from sources believed by
ANDEROL to be accurate. ANDEROL does not assume any legal responsibility for use of reliance upon it. Only Chemists or chemically qualified lab technicians should carry out tests. Before using any
chemicals, read its label and Material Safety Data Sheet.
PROPERTIES TEST METHOD ANDEROL PG Supreme 46
Appearance @ 20°C
Viscosity @ 40°C, cSt
Viscosity @ 100°C, cSt
Viscosity Index
Density @ 15°C, kg/l
Total Acid Number, mg KOH/g
Flash Point, COC, °C
Pour Point, °C
Steel Corrosion
Copper corrosion
Demulsibility @ 54°C, min
Four Ball Wear, 1200 rpm, 40 kg , 75°C
Visual
ASTM D-445
ASTM D-445
ASTM D-2270
ASTM D-1298
ASTM D-664
ASTM D-92
ASTM D-97
ASTM D-665B
ASTM D-130
ASTM D-1401
ASTM D-4172
Clear light yellow liquid
46.9
8.9
173
0.995
0.3
210
-60
Pass
1b
30
0.5 |
