ANDEROL HTS 100
High Torque and Speed Compressor Lubricant Product Data Sheet
PROPERTIES TEST METHOD ANDEROL HTS 100
Appearance @ 20°C
Viscosity @ 40°C, cSt
Viscosity @ 100°C, cSt
Viscosity Index
Density @ 15°C, kg/l
Total Acid Number, mg KOH/g
Flash Point, °C
Pour Point, °C
Demulsibility @ 82°C,min
visual
ASTM D-445
ASTM D-445
ASTM D-2270
ASTM D-1298
ASTM D-664
ASTM D-92
ASTM D-97
ASTM D-1401
Clear Yellow Liquid
102.2
12.6
116
0.881
0.18
248
- 45
10
ANDEROL HTS 100 is a synthetic based, high performing Compressor lubricant
to be used in High torque / high speed industrial equipment.
This formulation was developed with highly advanced additive technology
providing very high anti wear and anti oxidation resistance in difficult and very
demanding vane compressor applications.
ADVANTAGES / BENEFITS COMPATIBILITY APPLICATION
Excellent oxidation and thermal
stability
High operating temperature range
Lower maintenance costs
Excellent load carrying ability
Extended lubricant life
Improved cleanliness
Compatible with most paints, gaskets
and seals used with conventional
petroleum based oils
Excellent anti wear & EP performance
Very good rust and copper corrosion
prevention
Compatible with petroleum oils,
therefore allowing minimal effort to
changeover
The following seals, paints and plastics
are recommended for use in contact with
Anderol Synthetic Lubricants. Materials
not recommended are also shown. For
more information on other materials see
our ‘Compatibility Guide’.
RECOMMENDED:
Viton, High Nitrile Buna N, Teflon, Epoxy
Paint, Oil-Resistant Alkyd, Nylon, Delrin,
Celcon, PBT
NOT RECOMMENDED:
Neoprene, SBR Rubber, Low Nitrile Buna
N, Acrylic Paint, Lacquer, Polystrene,
PVC, ABS
Particularly suited for vane
compressor applications in
extreme service conditions.
This product can naturally also
be used for general rotating
equipment applications.
FOR MORE INFORMATION PLEASE REFER TO THE RELEVANT MATERIAL SAFETY DATA SHEET
This information is furnished without warranty, representation, inducement, or license of any kind except that it is accurate to the best of OUR knowledge or obtained from sources believed by
ANDEROL to be accurate. ANDEROL does not assume any legal responsibility for use of reliance upon it. Only Chemists or chemically qualified lab technicians should carry out tests. Before using any
chemicals, read its label and Material Safety Data Sheet.
ANDEROL BV
Punterweg 21 A
6222 NW MAASTRICHT |
