ANDEROL FGH 15
H1 High Performance Food Grade Hydraulic Lubricant Product Data Sheet
ANDEROL FGH 15 is synthetic Hydraulic oil based on a mixture of specially selected non-toxic synthetic
polyalphaolefins combined with a high performance additive Technology.
ANDEROL FGH 15 meets the lubrication requirements of Hydraulic systems running in food processing
plants.
ANDEROL FGH range is available in the grades ISO VG 32, 46, 68 and 100.
ANDEROL FGH 15 is NSF/H1 and InS/H1 registered. The product is certified Kosher by the Orthodox
Union and Halal by the Islamic Food Council of Europe.
ANDEROL Food Grade Lubricants meet the requirement of the FDA regulation 21 CFR 178.3570.
ADVANTAGES / BENEFITS COMPATIBILITY APPLICATION
Fewer oil changes
Compatible with hydraulic seals, gaskets,
hoses and air system components
Reduced varnish lacquering and deposits
Less maintenance intervals
Lower oil consumption
Excellent anti-wear properties
Rust and oxidation inhibited
Good water separation
ANDEROL synthetic hydrocarbon
based lubricants are similar to mineral
oils in their compatibility with paints,
seals, gaskets and hoses. No special
precautions related to compatibility are
required when changing over from a
mineral oil lubricant to an ANDEROL
synthetic hydrocarbon based lubricant.
Recommended for hydraulic systems
in Food processing machinery.
Also recommended for chains, vanes,
canning and bottling machinery.
Nominal Operating Range is -35/-40°C
to 170°C
PROPERTIES TEST METHOD ANDEROL FGH 15
Appearance @ 20°C
Viscosity @ 40°C, cSt
Viscosity @ 100°C, cSt
Viscosity Index
Density @ 15°C, kg/l
Total Acid Number, mg KOH/g
Flash Point, °C
Pour Point, °C
Demulsibility @ 54°C,min
visual
ASTM D-445
ASTM D-445
ASTM D-2270
ASTM D-1298
ASTM D-664
ASTM D-92
ASTM D-97
ASTM D-1401
Clear colorless to light yellow liquid
14.7
3.5
119
0.820
0.05
210
-40
5
FOR MORE INFORMATION PLEASE REFER TO THE RELEVANT MATERIAL SAFETY DATA SHEET
APPROVALS / REGISTRATIONS
ANDEROL BV
Punterweg 21 A
6222 NW MAASTRICHT
The NETHERLANDS
Tel No.: +31 (0)43 352 41 90
Fax No.: +31 (0)43 352 41 99
www.anderol-europe.com
This information is furnished without warranty, representation, inducement, or license of any kind except that it is accurate to the best of OUR knowledge or obtained from sources believed by
ANDEROL to be accurate. ANDEROL does not assume any legal responsibility for use of reliance upon it. Only Chemists or chemically qualified lab technicians should carry out tests. Before using any
chemicals, read its label and Material Safety Data Sheet.
APPROVALH1 High Performance Food Grade Hydraulic Lubricant Product Data Sheet
ANDEROL FGH 15 is synthetic Hydraulic oil based on a mixture of specially selected non-toxic synthetic
polyalphaolefins combined with a high performance additive Technology.
ANDEROL FGH 15 meets the lubrication requirements of Hydraulic systems running in food processing
plants.
ANDEROL FGH range is available in the grades ISO VG 32, 46, 68 and 100.
ANDEROL FGH 15 is NSF/H1 and InS/H1 registered. The product is certified Kosher by the Orthodox
Union and Halal by the Islamic Food Council of Europe.
ANDEROL Food Grade Lubricants meet the requirement of the FDA regulation 21 CFR 178.3570.
ADVANTAGES / BENEFITS COMPATIBILITY APPLICATION
Fewer oil changes
Compatible with hydraulic seals, gaskets,
hoses and air system components
Reduced varnish lacquering and deposits
Less maintenance intervals
Lower oil consumption
Excellent anti-wear properties
Rust and oxidation inhibited
Good water separation
ANDEROL synthetic hydrocarbon
based lubricants are similar to mineral
oils in their compatibility with paints,
seals, gaskets and hoses. No special
precautions related to compatibility are
required when changing over from a
mineral oil lubricant to an ANDEROL
synthetic hydrocarbon based lubricant.
Recommended for hydraulic systems
in Food processing machinery.
Also recommended for chains, vanes,
canning and bottling machinery.
Nominal Operating Range is -35/-40°C
to 170°C
PROPERTIES TEST METHOD ANDEROL FGH 15
Appearance @ 20°C
Viscosity @ 40°C, cSt
Viscosity @ 100°C, cSt
Viscosity Index
Density @ 15°C, kg/l
Total Acid Number, mg KOH/g
Flash Point, °C
Pour Point, °C
Demulsibility @ 54°C,min
visual
ASTM D-445
ASTM D-445
ASTM D-2270
ASTM D-1298
ASTM D-664
ASTM D-92
ASTM D-97
ASTM D-1401
Clear colorless to light yellow liquid
14.7
3.5
119
0.820
0.05
210
-40
5
FOR MORE INFORMATION PLEASE REFER TO THE RELEVANT MATERIAL SAFETY DATA SHEET
APPROVALS / REGISTRATIONS
ANDEROL BV
Punterweg 21 A
6222 NW MAASTRICHT
The NETHERLANDS
Tel No.: +31 (0)43 352 41 90
Fax No.: +31 (0)43 352 41 99
www.anderol-europe.com
This information is furnished without warranty, representation, inducement, or license of any kind except that it is accurate to the best of OUR knowledge or obtained from sources believed by
ANDEROL to be accurate. ANDEROL does not assume any legal responsibility for use of reliance upon it. Only Chemists or chemically qualified lab technicians should carry out tests. Before using any
chemicals, read its label and Material Safety Data Sheet.
APPROVAL |
