ANDEROL FGCS-2 PLUS
Synthetic Food Grade Calcium Sulfonate Complex Grease NLGI-2 Product Data Sheet
ANDEROL FGCS 2 PLUS is an over-based Calcium Sulfonate based grease with exceptional
load carrying ability, excellent mechanical stability and good resistance to oxidation and
corrosion.
ANDEROL FGCS 2 PLUS equals or outperforms other premium Food-Grade greases.
APPLICATIONS / ADVANTAGES REGISTRATIONS / APPROVAL HANDLING AND STORAGE
Superior mechanical stability, particularly in
the presence of heat and water
formulated to resist separation under
centrifugal forces
Excellent rust prevention properties
Excellent load carrying ability and wear
protection
Excellent resistance to water washout and
spray-off
H1 grease for incidental contact with food
Heavy duty food-grade applications
Life performance is typically increased by
two to three that of a regular mineral oil
based grease
ANDEROL lubricants are approved,
recommended and field tested by
many OEM’s in the Food processing,
bottling, canning, meat processing and
pharmaceutical industries
.
ANDEROL lubricants generally present little
hazard in normal handling if ordinary care is
exercised. If spilled, cover with inert,
absorbent material and remove. Flush the
area with water.
Although ANDEROL lubricants are not highly
flammable, they will burn and should be kept
away from open flames. In case of fire, use
water spray, foam, carbon dioxide, or dry
chemical.
ANDEROL lubricants should be stored
preferably in protected locations to prevent
contamination. Do not re-use drums; flush
and send to re-conditioner.
FOR MORE INFORMATION PLEASE REFER TO THE RELEVANT MATERIAL SAFETY DATA SHEET
APPROVALS / REGISTRATIONS
ANDEROL BV
Punterweg 21 A
6222 NW MAASTRICHT
The NETHERLANDS
Tel No.: +31 (0)43 352 41 90
Fax No.: +31 (0)43 352 41 99
www.anderol-europe.com
This information is furnished without warranty, representation, inducement, or license of any kind except that it is accurate to the best of OUR knowledge or obtained from sources believed by
ANDEROL to be accurate. ANDEROL does not assume any legal responsibility for use of reliance upon it. Only Chemists or chemically qualified lab technicians should carry out tests. Before using any
chemicals, read its label and Material Safety Data Sheet.
PROPERTIES TEST METHOD ANDEROL FGCS-2 PLUS
Thickener
Color
Type of Base Oil
Operating temperature for long-term lubrication, °C
Short term admissible temperature peak value, °C
Dropping Point, °C
Worked Penetration
Base Oil Viscosity at 40°C
4-Ball Weld Load
Water Washout @ 80°C
Bearing Life Performance, hours @ 1000 rpm, 160°C
Low Temperature Torque at -40°C
Designation
DIN ISO 2176
DIN ISO 2137
DIN 51.562
ASTM D-2596
ASTM D-1264
ASTM D-3527
ASTM-D-4693
DIN 51.502
Ca-Sulfonate
Tan
PAO
-40 to 177 °C
+200°C
318°C
265 to 295 0.1 mm
Approx. 50 mm²/s
4000 N
0.5% removed
280 hours
4.0 Nm
KP 2 U-40 |
