ANDEROL FGCS-2 HD
H1 Synthetic Heavy Duty Food Grade Grease Product Data Sheet
ANDEROL FGCS 2 HD is an over-based Calcium Sulfonate based grease developed with
patented technology. This is characterized by exceptional mechanical stability, high load
carrying performance, reduced wear and excellent resistance to water and corrosion.
ANDEROL FGCS 2 HD has a NSF/H1 and InS/H1 registration. This product meets
the lubrication requirements of equipment operating in food processing plants.
ANDEROL Food Grade Lubricants meet the requirement of the FDA regulation
21 CFR 178.3570
ANDEROL FGCS 2 HD may be handled using conventional grease handling and dispensing
methods.
APPLICATIONS / ADVANTAGES REGISTRATIONS / APPROVAL HANDLING AND STORAGE
• Superior mechanical stability, particularly in
the presence of heat and water
• Excellent resistance to water washout and
spray-off
• Excellent rust prevention properties
• Excellent thermal and oxidation stability
• Excellent load carrying ability and wear
protection
• Resistant to shock load
• H1 grease for incidental contact with food
ANDEROL synthetic hydrocarbon based
lubricants are similar to mineral oils in their
compatibility with paints, seals, gaskets
and hoses. No special precautions related
to compatibility are required when
changing over from a mineral oil lubricant
to an ANDEROL synthetic hydrocarbon
based lubricant.
ANDEROL Lubricants generally present little
hazard in normal handling if ordinary care is
exercised. If spilled, cover with inert, absorbent
material and remove. Flush the area with water.
Although ANDEROL Lubricants are not highly
flammable, they will burn and should be kept
away from open flames. In case of fire, use
water spray, foam, carbon dioxide, or dry
chemical.
ANDEROL Lubricants should be stored
preferably in protected locations to prevent
contamination. Do not re-use drums; flush and
send to re-conditioner.
FOR MORE INFORMATION PLEASE REFER TO THE RELEVANT MATERIAL SAFETY DATA SHEET
APPROVALS / REGISTRATIONS
This information is furnished without warranty, representation, inducement, or license of any kind except that it is accurate to the best of OUR knowledge or obtained from sources believed by
ANDEROL to be accurate. ANDEROL does not assume any legal responsibility for use of reliance upon it. Only Chemists or chemically qualified lab technicians should carry out tests. Before using any
chemicals, read its label and Material Safety Data Sheet.
PROPERTIES TEST METHOD ANDEROL FGCS-2 HD
NLGI Grade
Thickener
Type of Base Oil
Base Oil Viscosity, cSt @ 40 °C
Color
Operating temperature for long-term lubrication, °C
Short term admissible temperature peak value, °C
Mechanical Stability, % Change @ 10000 Strokes
Dropping Point, °C
4-Ball Weld Load, kg
4-Ball Wear, mm
Water Washout, % lost @ 80°C
Salt Fog Corrosion, hours
Bearing Life Performance, hours @ 1000 rpm, 160°C
Fe-8 (80 kN, 75 rpm, 500 h, 80°C)
Wear outer ring
Wear inner ring
Wear Cage
Wear Rollers
ASTM D-445
ASTM D-2265
ASTM D-92
ASTM D-217
ASTM D-97
ASTM D-2596
ASTM D-2266
ASTM-D1264
ASTM B117
ASTM D-3527
DIN 51819 T1-T3
2
Ca-Sulfonate
PAO
400
Tan
-30 to 175
200
4.5
318
400
0.50
3.5
>300
260
Low wear of rollers, rings and cages
8
3
6
17 |
