深圳市汇通行润滑油有限公司
网站首页 关于我们 产品总汇 润滑油知识 工业油订购流程 在线订购 联系我们
快捷 高效 周到 贴心 全心全意为客户服务 销售热线:0755-27971019 传真:0755-27971089 手机:134 8078 1231李明
康菲石油 > Anderol安润龙润滑油 > ANDEROL C-NRT FGC 68
ANDEROL C-NRT FGC 68 详细说明 (浏览1489次)
ANDEROL C-NRT FGC 68
H1 Food Grade Inert Compressor Lubricant Product Data Sheet
PROPERTIES TEST METHOD ANDEROL C-NRT
FGC 68
Appearance @ 20°C
Viscosity @ 40°C, cSt
Viscosity @ 100°C, cSt
Viscosity Index
Density @ 15°C, kg/l
Total Acid Number, mg KOH/g
Flash Point, °C
Pour Point, °C
Demulsibility @ 54°C
visual
ASTM D-445
ASTM D-445
ASTM D-2270
ASTM D-1298
ASTM D-664
ASTM D-92
ASTM D-97
ASTM D-1401
Clear yellow liquid
71.5
10.8
140
0.848
0.15
240
-48
10
ANDEROL C-NRT FGC 68 is a unique H1 registered synthetic lubricant meeting all
requirements of air compressors running in food processing plants.
It is specifically designed to provide inertness and long-term lubrication in industrial
applications, where contact with (reactive) chemistries cannot be avoided.
Where any other chemistry fails, this product will withstand attacks of all aggressive
gasses and resist the rapid breakdown which is unavoidable with any other
mineral/ester/PAO based product.
The complementary Thermal and Oxidative stability of the base fluid in combination with
oxidation inhibitors, extends lubricant life at elevated temperature conditions.
Thanks to its excellent detergency effect deposit/lacquering formation is avoided.
ANDEROL C-NRT FGC 68 meets or exceeds the following specifications: DIN 51506
ADVANTAGES / BENEFITS COMPATIBILITY APPLICATION
ANDEROL synthetic lubricants are the only
long-life synthetic lubricants with over 60
years of successful performance.
 Chemically inert to chemical gasses of
acidic nature
 No metal additives to interfere with
catalytic processes
 Increases maintenance intervals
 Greatly reduces fire and explosion
hazard
 Lower oil consumption
 Eliminates lacquering and deposits
completely
 Reduces energy consumption
ANDEROL synthetic hydrocarbon based
lubricants are similar to mineral oils in their
compatibility with paints, seals, gaskets and
hoses. No special precautions related to
compatibility are required when changing
over from a mineral oil lubricant to an
ANDEROL synthetic hydrocarbon based
lubricant.
Cylinder and crankcase lubrication for screw,
reciprocating and vane compressors for the
following gases:
 Air
 Butadiene
 Carbon Monoxide
 Furnace (crack)
gas
 Carbon Dioxide
(dry)
 Ethylene
 Helium
 Hydrogen
 Fluoride gasses
 Hydrogen Sulfide
(dry)
 Natural gas
 Methane
 Nitrogen
 Propane
 Synthesis Gas
 Sulfur Hexafluoride
 Bio gas
Nominal Operating Range -40°C to 170°C
FOR MORE INFORMATION PLEASE REFER TO THE RELEVANT MATERIAL SAFETY DATA SHEET
This information is furnished without warranty, representation, inducement, or license of any kind except that it is accurate to the best of OUR knowledge or obtained from sources believed by
ANDEROL to be accurate. ANDEROL does not assume any legal responsibility for use of reliance upon it. Only Chemists or chemically qualified lab technicians should carry out tests. Before using any
chemicals, read its label and Material Safety Data Sheet.
ANDEROL BV
Punterweg 21 A
6222 NW MAASTRICHT
上一产品: ANDEROL RCF-P 68
下一产品: ANDEROL C-NRT FGC 46
版权所有:深圳市汇通行润滑油有限公司 网站备案:粤ICP备16124526号 网址:www.hthrhy.com 邮箱:hthrhy@126.com
电话:0755-27971019 传真:0755-27971089 手机:134 8078 1231李明 地址:深圳市南山区科技园高新南一路中科大夏