ANDEROL C-NRT FGC 32
H1 Food Grade Inert Compressor Lubricant Product Data Sheet
PROPERTIES TEST METHOD ANDEROL C-NRT
FGC 32
Appearance @ 20°C
Viscosity @ 40°C, cSt
Viscosity @ 100°C, cSt
Viscosity Index
Density @ 15°C, kg/l
Total Acid Number, mg KOH/g
Flash Point, °C
Pour Point, °C
Demulsibility @ 54°C
visual
ASTM D-445
ASTM D-445
ASTM D-2270
ASTM D-1298
ASTM D-664
ASTM D-92
ASTM D-97
ASTM D-1401
Clear yellow liquid
32.5
5.82
122
0.8405
0.15
234
-63
5
ANDEROL C-NRT FGC 32 is a unique H1 registered synthetic lubricant meeting all
requirements of air compressors running in food processing plants.
It is specifically designed to provide inertness and long-term lubrication in industrial
applications, where contact with (reactive) chemistries cannot be avoided.
Where any other chemistry fails, this product will withstand attacks of all aggressive
gasses and resist the rapid breakdown which is unavoidable with any other
mineral/ester/PAO based product.
The complementary Thermal and Oxidative stability of the base fluid in combination with
oxidation inhibitors, extends lubricant life at elevated temperature conditions.
Thanks to its excellent detergency effect deposit/lacquering formation is avoided.
ADVANTAGES / BENEFITS COMPATIBILITY APPLICATION
ANDEROL synthetic lubricants are the only
long-life synthetic lubricants with over 60
years of successful performance.
Chemically inert to chemical gasses of
acidic nature
No metal additives to interfere with
catalytic processes
Increases maintenance intervals
Greatly reduces fire and explosion
hazard
Lower oil consumption
Eliminates lacquering and deposits
completely
Reduces energy consumption
ANDEROL synthetic hydrocarbon based
lubricants are similar to mineral oils in their
compatibility with paints, seals, gaskets and
hoses. No special precautions related to
compatibility are required when changing
over from a mineral oil lubricant to an
ANDEROL synthetic hydrocarbon based
lubricant.
Cylinder and crankcase lubrication for
centrifugal and screw compressors for the
following gases:
Air
Butadiene
Carbon Monoxide
Furnace (crack)
gas
Carbon Dioxide
(dry)
Ethylene
Helium
Hydrogen
Fluoride gasses
Hydrogen Sulfide
(dry)
Natural gas
Methane
Nitrogen
Propane
Synthesis Gas
Sulfur Hexafluoride
Bio gas
Nominal Operating Range -40°C to 210°C
FOR MORE INFORMATION PLEASE REFER TO THE RELEVANT MATERIAL SAFETY DATA SHEET
This information is furnished without warranty, representation, inducement, or license of any kind except that it is accurate to the best of OUR knowledge or obtained from sources believed by
ANDEROL to be accurate. ANDEROL does not assume any legal responsibility for use of reliance upon it. Only Chemists or chemically qualified lab technicians should carry out tests. Before using any
chemicals, read its label and Material Safety Data Sheet.
ANDEROL BV
Punterweg 21 A
6222 NW MAASTRICHT
The NETHERLANDS
Tel No.: +31 (0)43 352 41 90
Fax No. |
