深圳市汇通行润滑油有限公司
网站首页 关于我们 产品总汇 润滑油知识 工业油订购流程 在线订购 联系我们
快捷 高效 周到 贴心 全心全意为客户服务 销售热线:0755-27971019 传真:0755-27971089 手机:134 8078 1231李明
康菲石油 > Anderol安润龙润滑油 > ANDEROL 783-00 SPRAY
ANDEROL 783-00 SPRAY 详细说明 (浏览1597次)
ANDEROL 783-00 SPRAY
H1 High Performance Food Grade Grease Spray Product Data Sheet
ANDEROL 783-00 SPRAY is a synthetic hydrocarbon (PAO) based aluminum complex thickened
grease designed for use in food processing machinery. It is a non-toxic, high quality general
purpose grease especially suitable for cold temperature applications.
The semi-fluid grease has been dissolved and put in a spray device so it can be used as aerosol.
ANDEROL 783-00 is NSF/H1 and InS/H1 registered. The product is certified
Kosher by the Orthodox Union and Halal by the Islamic Food Council of Europe.
ANDEROL Food Grade Lubricants meet the requirement of the FDA regulation 21 CFR
178.3570
 Easy application
 Good penetration
 Excellent wear protection
 High and low temperature applications
 Good mechanical stability
 Resistant to water penetration
 Roller and friction bearings in food and
beverage, cosmetic and pharmaceutical
industries
 Grease lubricated points in can seaming
and bottling
 Corrosion protection
Easy to use in difficult reachable places.
Operating temperature range for long-term
Lubrication : -45 to +160 °C
Short time admissible temperature peak
Value : +200 °C
ANDEROL synthetic hydrocarbon based
lubricants are similar to mineral oils in their
compatibility with paints, seals, gaskets and
hoses.
When changing over from other grease types
contact our Technical department and ask for
the grease compatibility guide and change over
procedure.
FOR MORE INFORMATION PLEASE REFER TO THE RELEVANT MATERIAL SAFETY DATA SHEET
ANDEROL BV
Punterweg 21 A
6222 NW MAASTRICHT
The NETHERLANDS
Tel No.: +31 (0)43 352 41 90
Fax No.: +31 (0)43 352 41 99
www.anderol-europe.com
APPROVALS / REGISTRATIONS
ADVANTAGES / BENEFITS COMPATIBILITY APPLICATION
PROPERTIES TEST METHOD ANDEROL 783-00
Spray
Appearance @ 20°C
Thickener
Type of Base Oil
Dropping Point, °C
Worked Penetration
Base Oil viscosity, cSt @ 40 °C
Water Resistance
Corrosion Protection
4-Ball Weld Load, N
Designation
Visual
ASTM D-2265
ASTM D-217
ASTM D-445
DIN 51.807-01
IP 220/85
DIN 51.350
DIN 51.502
White Semi-Fluid
Al-complex
Synthetic (PAO)
>250
400 to 430
350
0-90
Corrosion degree 0/0
2400
GPFHC 00 P-40
上一产品: ANDEROL RCF-P 68
下一产品: ANDEROL 783-00
版权所有:深圳市汇通行润滑油有限公司 网站备案:粤ICP备16124526号 网址:www.hthrhy.com 邮箱:hthrhy@126.com
电话:0755-27971019 传真:0755-27971089 手机:134 8078 1231李明 地址:深圳市南山区科技园高新南一路中科大夏