ANDEROL 7460 FG
H1 High Performance Food Grade Gear & Chain Lubricant Product Data Sheet
ANDEROL 7460 FG is a high performance product, designed primarily for industrial
worm gear applications in the food & beverage industry. It may also be considered as a
general purpose gear lubricant or to lubricate chains and ways.
This fluid is a synthetic Polyalkylene Glycol (PAG) based fluid that provides excellent
thermal and oxidative stability, load carrying ability and sludge-free operation over a
wide temperature range. The PAG base stock is enhanced with a special mixture of
additives providing thermal oxidation stability and anti wear performance.
ANDEROL 7460 FG is NSF/H1 and InS/H1 registered.
ANDEROL Food Grade Lubricants meet the requirement of the FDA regulation 21 CFR
178.3570.
ADVANTAGES / BENEFITS COMPATIBILITY APPLICATION
Long life, fewer oil changes
High water tolerance
Very good heat dissipation
Improved thermal stability
Increased oxidative stability
Extends equipment life
High and low temperature
operations
Excellent corrosion inhibition
Reduced volatility
No sludge formation
ANDEROL 7460 FG is PAG based, therefore
thorough cleaning is recommended when
mixing with any other chemistries, such as
petroleum based (mineral oils) and/or PAO
(Polyalphaolefins).
When changing over from a conventional
mineral oil care should be taken to minimize
contamination caused by decomposition
material from the previous lubricant.
Thorough cleaning with an ester followed by a
light petroleum solvent is advisable.
Worm gears
Chains and ways, including high water
containing applications.
They can also be used in:
Low speed gear sets
Bearings
Circulation systems
PROPERTIES TEST METHOD ANDEROL 7460 FG
Appearance @ 20°C
Viscosity @ 40°C, cSt
Viscosity @ 100°C, cSt
Viscosity Index
Density @ 15°C, kg/l
Total Acid Number, mg KOH/g
Flash Point, COC, °C
Pour Point, °C
Four ball Wear,1200 rpm, 75°C, 40kg
Four Ball Weld, kg
Copper Corrosion
visual
ASTM D-445
ASTM D-445
ASTM D-2270
ASTM D-1298
ASTM D-664
ASTM D-92
ASTM D-97
ASTM D-4172
ASTM D-2783
ASTM D-130
Clear liquid
467.0
70.1
229
0.998
1.6
268
33
0.3
250
1a
FOR MORE INFORMATION PLEASE REFER TO THE RELEVANT MATERIAL SAFETY DATA SHEET
APPROVALS / REGISTRATIONS
ANDEROL BV
Punterweg 21 A
6222 NW MAASTRICHT
The NETHERLANDS
Tel No.: +31 (0)43 352 41 90
Fax No.: +31 (0)43 352 41 99
www.anderol-europe.com
This information is furnished without warranty, representation, inducement, or license of any kind except that it is accurate to the best of OUR knowledge or obtained from sources believed by
ANDEROL to be accurate. ANDEROL does not assume any legal responsibility for use of reliance upon it. Only Chemists or chemically qualified lab techn |
