ANDEROL 7150 FG
H1 High Performance Food Grade Gear & Chain Lubricant
Product Data Sheet
ANDEROL 7150 FG is a high performance product, designed primarily for industrial worm
gear applications in the food & beverage industry. It may also be considered as a general
purpose gear lubricant or to lubricate chains and ways.
This fluid is a synthetic Polyalkylene Glycol (PAG) based fluid that provides excellent thermal
and oxidative stability, load carrying ability and sludge-free operation over a wide temperature
range. The PAG base stock is enhanced with a special mixture of additives
providing thermal oxidation stability and anti wear performance.
ANDEROL 7150 FG is NSF/H1 and InS/H1 registered.
ANDEROL Food Grade Lubricants meet the requirement of the FDA regulation 21 CFR
178.3570.
· Long life, fewer oil changes
· High water tolerance
· Very good heat dissipation
· Improved thermal stability
· Increased oxidative stability
· Extends equipment life
· High and low temperature operations
· Excellent corrosion inhibition
· Reduced volatility
· No sludge formation
• Worm gears
• Chains and ways, including high water
containing applications.
They can also be used in:
· Low speed gear sets
· Bearings
· Circulation systems
· Almost all gear sets requiring an
ISO 150 or 220 VG oil.
ANDEROL 7150 FG is PAG based, therefore
thorough cleaning is recommended when
mixing with any other chemistries, such as
petroleum based (mineral oils) and/or PAO
(Polyalphaolefins).
When changing over from a conventional
mineral oil care should be taken to minimize
contamination caused by decomposition
material from the previous lubricant.
Thorough cleaning with an ester followed by a
light petroleum solvent is advisable.
FOR MORE INFORMATION PLEASE REFER TO THE RELEVANT MATERIAL SAFETY DATA SHEET
ANDEROL BV
Punterweg 21 A
6222 NW MAASTRICHT
The NETHERLANDS
Tel No.: +31 (0)43 352 41 90
Fax No.: +31 (0)43 352 41 99
www.anderol-europe.com
APPROVALS / REGISTRATIONS
ADVANTAGES / BENEFITS COMPATIBILITY APPLICATION
PROPERTIES TEST METHOD ANDEROL 7150 FG
Appearance @ 20°C
Viscosity @ 40°C, cSt
Viscosity @ 100°C, cSt
Viscosity Index
Density @ 15°C, kg/l
Total Acid Number, mg KOH/g
Flash Point, COC, °C
Pour Point, °C
Four ball Wear,1200 rpm, 75°C, 40kg
Four Ball Weld, kg
Copper Corrosion
visual
ASTM D-445
ASTM D-445
ASTM D-2270
ASTM D-1298
ASTM D-664
ASTM D-92
ASTM D-97
ASTM D-4172
ASTM D-2783
ASTM D-130
Clear liquid
162.5
26.8
202
0.9976
1.6
278
- 39
0.35
160
1a |
