ANDEROL 500
Synthetic Compressor Lubricant Product Data Sheet
PROPERTIES TEST METHOD ANDEROL 500
Appearance @ 20°C
Viscosity @ 40°C, cSt
Viscosity @ 100°C, cSt
Viscosity Index
Density @ 15°C, kg/l
Total Acid Number, mg KOH/g
Flash Point, °C
Pour Point, °C
Demulsibility @ 82°C,min
visual
ASTM D-445
ASTM D-445
ASTM D-2270
ASTM D-1298
ASTM D-664
ASTM D-92
ASTM D-97
ASTM D-1401
Clear Yellow Liquid
97.8
10.0
78
0.953
0.07
232
-36
10
ANDEROL 500 is an ISO 100 synthetic diester based compressor lubricant
specifically designed to provide longterm lubrication in air and process gas
compressors.
ANDEROL 500 meets or exceeds the following specifications:
DIN 51506
ADVANTAGES / BENEFITS COMPATIBILITY APPLICATION
No metal additives to interfere with catalytic
processes
● Fewer oil changes
● Reduces compressor maintenance
● Greatly reduces fire and explosion
hazard
● Separates water condensate rapidly
● Lower oil consumption
● Eliminates lacquering and deposits
Reduces energy consumption
The following seals, paints and plastics are
recommended for use in contact with
Anderol Synthetic Lubricants. Materials not
recommended are also shown. For more
information on other materials see our
‘Compatibility Guide’.
RECOMMENDED :
Viton, High Nitrile Buna N, Teflon, Epoxy
Paint, Oil-Resistant Alkyd, Nylon, Delrin,
Celcon, PBT
NOT RECOMMENDED:
Neoprene, SBR Rubber, Low Nitrile Buna
N, Acrylic Paint, Lacquer, Polystrene, PVC,
ABS
● Air
● Butadiene
● Carbon Monoxide
● Carbon Dioxide
(dry)
● Ethylene
● Helium
● Hydrogen
● Natural gas
● Methane
● Nitrogen
● Propane
Cylinder and crankcase lubrication for
reciprocating compressors, vane
compressors and vacuum pumps.
Nominal Operating Range -15°C to
210 °C
FOR MORE INFORMATION PLEASE REFER TO THE RELEVANT MATERIAL SAFETY DATA SHEET
This information is furnished without warranty, representation, inducement, or license of any kind except that it is accurate to the best of OUR knowledge or obtained from sources believed by
ANDEROL to be accurate. ANDEROL does not assume any legal responsibility for use of reliance upon it. Only Chemists or chemically qualified lab technicians should carry out tests. Before using any
chemicals, read its label and Material Safety Data Sheet.
ANDEROL BV
Punterweg 21 A
6222 NW MAASTRICHT
The NETHERLANDS
Tel No.: +31 (0)43 352 41 90
Fax No.: +31 (0)43 352 41 99
www.anderol-europe.c |
