ANDEROL 497
Synthetic Compressor Lubricant Product Data Sheet
ANDEROL 497 is an ISO 68 synthetic di-ester based compressor lubricant specifically
designed to provide longterm lubrication in air and process gas compressors and vacuum
pumps.
ANDEROL 497 is rated H2 for use in food processing plant applications
ANDEROL 497 meets or exceeds the following specifications:
DIN 51506
ADVANTAGES / BENEFITS COMPATIBILITY APPLICATION
ANDEROL synthetic lubricants are the only
long-life synthetic lubricants with over 60 years
of successful performance.
No metal additives to interfere with catalytic
processes
Fewer oil changes
Increases maintenance intervals
Greatly reduces fire and explosion hazard
Separates water condensate rapidly
Lower oil consumption
Eliminates lacquering and deposits
Reduces energy consumption
The following seals, paints and plastics are
recommended for use in contact with Anderol
Synthetic Lubricants. Materials not
recommended are also shown. For more
information on other materials see our
‘Compatibility Guide’.
RECOMMENDED :
Viton, High Nitrile Buna N, Teflon, Epoxy Paint,
Oil-Resistant Alkyd, Nylon, Delrin, Celcon, PBT
NOT RECOMMENDED:
Neoprene, SBR Rubber, Low Nitrile Buna N,
Acrylic Paint, Lacquer, Polystrene, PVC, ABS
ANDEROL 497 can be used for the
lubrication of
Oil flooded rotary screw compressors
Oil flooded rotary vane compressors
Axial compressors
Centrifugal compressors & vacuum
pumps
in the presence of following gases:
Air
Butadiene
Carbon Monoxide
Furnace (crack) gas
Carbon Dioxide (dry)
Ethylene
Helium
Hydrogen
Hydrogen Sulfide (dry)
Natural gas
Methane
Nitrogen
Propane
Synthesis Gas
Sulfur Hexafluoride
Nominal Operating Range -25°C to 210 °C
FOR MORE INFORMATION PLEASE REFER TO THE RELEVANT MATERIAL SAFETY DATA SHEET
REGISTRATIONS
ANDEROL BV
Punterweg 21 A
6222 NW MAASTRICHT
The NETHERLANDS
Tel No.: +31 (0)43 352 41 90
Fax No.: +31 (0)43 352 41 99
www.anderol-europe.com
This information is furnished without warranty, representation, inducement, or license of any kind except that it is accurate to the best of OUR knowledge or obtained from sources believed by
ANDEROL to be accurate. ANDEROL does not assume any legal responsibility for use of reliance upon it. Only Chemists or chemically qualified lab technicians should carry out tests. Before using any
chemicals, read its label and Material Safety Data Sheet.
PROPERTIES TEST METHOD ANDEROL 497
Appearance @ 20 ° C
Viscosity @ 40 ° C, cSt
Viscosity @ 100 ° C, cSt
Viscosity Index
Density @ 15 ° C, kg/l
Total Acid Number, mg KOH/g
Flash Point, ° C
Pour Point, ° C
Demulsibility @ 54 ° C, min
Visual
ASTM D-445
ASTM D-445
ASTM D-2270
ASTM D-1298
ASTM D-664
ASTM D-92
ASTM D-97
ASTM D-1401
Clear Yellow Liquid
70.8
7.7
62
0.951
0.05
248
-42
25 |
