ANDEROL 3057M
Synthetic Compressor Lubricant Product Data Sheet
ANDEROL 3057M is a PAO/ester based compressor lubricant that was designed to provide
long-term lubrication of both rotary-vane and oil-flooded screw compressors.
ANDEROL 3057Mmeets or exceeds DIN 51506 , ISO 6743-3 L-DAJ
ANDEROL 3000 range is available in the grades ISO VG 32, 46, 57, 68, 100 and 150.
ADVANTAGES / BENEFITS COMPATIBILITY APPLICATION
• Fewer oil changes for reduced maintenance
• Very good performance in conditions of
high humidity
• Resistance to oxidation with reduced
compressor varnish and deposits
• Greatly reduces fire and explosion hazard
• Lower oil consumption
• Longer service life and greater protection of
compressor components
• Reduces operating temperatures
The following seals, paints and plastics are
recommended for use in contact with Anderol
Company Synthetic Lubricants. Materials not
recommended are also shown. For more
information on other materials see our
‘Compatibility Guide’.
RECOMMENDED :
Viton, High Nitrile Buna N, Teflon, Epoxy Paint,
Oil-Resistant Alkyd, Nylon, Delrin, Celcon, PBT
NOT RECOMMENDED:
Neoprene, SBR Rubber, Low Nitrile Buna N,
Acrylic Paint, Lacquer, Polystrene, PVC, ABS
Recommended for use in compressors such
as:
• Oil flooded rotary screw compressors
• Oil flooded rotary vane compressors
ANDEROL 3057MCan be used for the
compression of Air, Helium and hydrocarbon
gasses containing fractions of acidic
components such as H2
S.
Especially recommended for railway Brake
systems.
Nominal operating range for Anderol 3057M
is -20°C to 205°C.
FOR MORE INFORMATION PLEASE REFER TO THE RELEVANT MATERIAL SAFETY DATA SHEET
APPROVALS / REGISTRATIONS
This information is furnished without warranty, representation, inducement, or license of any kind except that it is accurate to the best of OUR knowledge or obtained from sources believed by
ANDEROL to be accurate. ANDEROL does not assume any legal responsibility for use of reliance upon it. Only Chemists or chemically qualified lab technicians should carry out tests. Before using any
chemicals, read its label and Material Safety Data Sheet.
PROPERTIES TEST METHOD ANDEROL 3057M
Appearance @ 20°C
Viscosity @ 40°C, cSt
Viscosity @ 100°C, cSt
Viscosity Index
Density @ 15°C, kg/l
Total Acid Number, mg KOH/g
Flash Point, COC, °C
Pour Point, °C
Demulsibility @ 54°C,min
Air Release, 50°C
Sulphated Ash Content
Four Ball Wear
Viscosity @-25°C,cSt
Evaporation loss, 100°C, 22 hrs,%
visual
ASTM D-445
ASTM D-445
ASTM D-2270
ASTM D-1298
ASTM D-664
ASTM D-92
ASTM D-97
ASTM D-1401
ASTM D 3427
DIN 51575
ASTM D 4172
ASTM D-445
ASTM D-972
Clear Yellow Liquid
52.8
8.0
121
0.869
0.05
258
-54
15
3
0.018
0.38
7355
0.16 |
