ANDEROL 2460 HTCL
Synthetic High Temperature Chain Lubricant Product Data Sheet
PROPERTIES TEST METHOD ANDEROL 2460 HTCL
Appearance @ 20°C
Viscosity @ 40°C, cSt
Viscosity @ 100°C, cSt
Viscosity Index
Density @ 15°C, kg/l
Total Acid Number, mg KOH/g
Flash Point, °C
Pour Point, °C
Demulsibility @ 82°C,min
visual
ASTM D-445
ASTM D-445
ASTM D-2270
ASTM D-1298
ASTM D-664
ASTM D-92
ASTM D-97
ASTM D-1401
Clear Yellow Liquid
456
44.1
145
0.926
0.3
278
-40
30
APROVALS / REGISTRATIONS
ANDEROL 2460 HTCL is an ISO 460 synthetic ester based chain lubricant
specifically designed to provide longterm lubrication even under severe heavy
duty and extreme ambient conditions.
ANDEROL 2460 HTCL prevents wear, noise, sticking by means of :
Film reformation between loadings
Removal of frictional heat
Flushing of wear debris
Excellent corrosion and rust protection
The HTCL range is available in the grades ISO VG 100 , 150 , 220 , 320 and 460
ADVANTAGES / BENEFITS COMPATIBILITY APPLICATION
ANDEROL synthetic Chain lubricants are
the only long-life synthetic lubricants with
over 60 years of successful performance.
Protects against external and internal
wear
Very good drive lubrication
Lower oil consumption
Oil film stays well maintained
Reduces energy consumption & cost
The following seals, paints and plastics are
recommended for use in contact with
Anderol Synthetic Lubricants. Materials not
recommended are also shown. For more
information on other materials see our
‘Compatibility Guide’.
RECOMMENDED :
Viton, High Nitrile Buna N, Teflon, Epoxy
Paint, Oil-Resistant Alkyd, Nylon, Delrin,
Celcon, PBT
NOT RECOMMENDED:
Neoprene, SBR Rubber, Low Nitrile Buna
N, Acrylic Paint, Lacquer, Polystrene, PVC,
ABS
Recommended to be used in difficult
environments and conditions including:
Pulsating, heavy loads and/or high
speeds
Grit , dust , acids and moisture
High temperature
The 2460 HTCL can be applied by
Brush
Manually
Oil bath
Pressurized system
Nominal Operating Range up to 250 °C
FOR MORE INFORMATION PLEASE REFER TO THE RELEVANT MATERIAL SAFETY DATA SHEET
This information is furnished without warranty, representation, inducement, or license of any kind except that it is accurate to the best of OUR knowledge or obtained from sources believed by
ANDEROL to be accurate. ANDEROL does not assume any legal responsibility for use of reliance upon it. Only Chemists or chemically qualified lab technicians should carry out tests. Before using any
chemicals, read its label and Material Safety Data Sheet.
ANDEROL BV
Punterweg 21 A
6222 NW MAASTRICHT
The NETHERLANDS
Tel No.: +31 (0)43 352 41 90
Fax No.: +31 (0)43 352 41 99
www.anderol |
