深圳市汇通行润滑油有限公司
网站首页 关于我们 产品总汇 润滑油知识 工业油订购流程 在线订购 联系我们
快捷 高效 周到 贴心 全心全意为客户服务 销售热线:0755-27971019 传真:0755-27971089 手机:134 8078 1231李明
康菲石油 > Anderol安润龙压缩机油 > ANDEROL 530
ANDEROL 530 详细说明 (浏览1576次)
ANDEROL® 530
SYNTHETIC COMPRESSOR OIL
GENERAL INFORMATION
ANDEROL 530 is an ISO 68 diester based compressor lubricant formulated to provide excellent oxidation and
wear resistance.
For more information please refer to the
relevant Material Safety Data Sheet
accompanying each product.
®ANDEROL is a reg. trademark of ANDEROL COMPANY.
This information is furnished without warranty, representation, inducement,
or license of any kind, except that it is accurate to the best of OUR
knowledge or obtained from sources believed by ANDEROL to be
accurate. ANDEROL does not assume any legal responsibility for use of
reliance upon it. Only chemists or chemically qualified lab technicians
should carry out tests. Before using any chemical, read its label and
Material Safety Data Sheet.
TYPICAL PROPERTIES:
SALES SPECIFICATIONS
PROPERTY
TEST
METHOD
MIN
MAX
TYPICAL
RESULTS
Viscosity @ 40°C, cSt
Viscosity @ 100°C, cSt
Pour Point, °C
Flash Point, °C
Specific Gravity, 15.6°C
ASTM D-445
ASTM D-445
ASTM D-97
ASTM D-92
ASTM D-4052B
61.2
9.3
-
246
0.91
74.8
10.3
-32
-
0.93
62.4
9.8
-45
250
0.92
ADDITIONAL INFORMATION
PROPERTY
TEST METHOD
TYPICAL
RESULTS
Autoignition Temperature, °C
Conradson Carbon Residue, %
Evaporation, 22 hrs @ 99°C, %
Copper Strip Corrosion, 3 hrs @ 100°C
Demulsibility @ 54C, ml oil/water/emulsion (min)
Four-Ball Wear, 1200 rpm, 75°C, 40 kg, 1 hr, mm
ASTM E-659
ASTM D-189
ASTM D-972
ASTM D-130
ASTM D-1401
ASTM D-2266
405
0.02
<1.0
1A
40/38/2 (<60)
0.4
ANDEROL 530
APPLICATIONS
This extended drain interval lubricant is specifically recommended for use in reciprocating air compressors
exposed to wide temperature ranges that is required when used in railroad braking systems.
Nominal Operating Range is –25°C to 205°C (-15° to 400°F).
APPROVALS
ANDEROL synthetic lubricants are the only long-life synthetic lubricants with over 30 years of successful
performance. They are field tested, approved or recommended by most major compressor manufacturers.
Should you have any questions regarding the suitability of ANDEROL 530 compressor lubricant for a specific
manufacturer's model compressor, please check with your ANDEROL lubricant supplier or contact Anderol
Company.
COMPATIBILITY
The following seals, paints, and plastics are recommended for use in contact with Anderol Company
Synthetic Lubricants. Materials not recommended are also shown. For more information on other materials,
see our "Compatibility Guide."
RECOMMENDED - Viton, High Nitrile Buna N, Teflon, Epoxy Paint, Oil-Resistant Alkyd, Nylon, Delrin,
Celcon, PBT
NOT RECOMMENDED - Neoprene, SBR Rubber, Low Nitrile Buna N, Acrylic Paint, Lacquer, Polystyrene,
PVC, ABS
ADVANTAGES
·  Fewer oil changes ·  Lower oil consumption
·  Reduces compressor maintenance ·  Eliminates lacquering and deposits
·  Greatly reduces fire and explosion hazard ·  Reduces energy consumption
·  Separates water condensate rapidly
A530b: 10/23/01eb
ANDEROL®
Specialty Lubricants
上一产品: ANDEROL 8100/ANDEROL 8150/ANDEROL 8220
版权所有:深圳市汇通行润滑油有限公司 网站备案:粤ICP备16124526号 网址:www.hthrhy.com 邮箱:hthrhy@126.com
电话:0755-27971019 传真:0755-27971089 手机:134 8078 1231李明 地址:深圳市南山区科技园高新南一路中科大夏