|
网址：http://krayden.com/tds/dow_l-0132_tds.pdf
|
Molykote®（摩力克） 齿轮箱及链条润滑油
完整的工业润滑剂 合成油 矿物油 特种润滑剂
近60年来，世界各地的OEM设计人员、维护与材料工程师始终信赖MOLYKOTE®品牌，因为它的高性能和它具有的能解决或预防任何设备实际润滑问题的专业技术。其产品包括了目前工业界最齐全的润滑油系列，包括适用于液压系统、压缩机、真空泵、齿轮箱和链条的合成油或超高纯度矿物油；特种润滑剂复合物，润滑脂，油膏，减摩涂层及分散液。所提供的服务包括油品分析，润滑管理软件，润滑整合的审核和培训，以及关于润滑优化的咨询。MOLYKOTE®解决方案可以通过全球3000多个的销售渠道伙伴来得到。欲了解更多信息，请联系我们。 注： MOLYKOTE® 以及 Dow Corning®为道康宁公司的注册商标。
特种工业润滑油
道康宁提供完整的工业润滑油产品，从矿物油到合成油，帮助您解决在设备维护上的问题。Molykote品牌下的工业润滑油产品包括用于液压系统、空压机、真空泵、链条、制冷压缩机和其他设备的机械系统。其中包括大量符合食品安全的食品级润滑剂，适用于食品及饮料的加工设备，同样也适用于钢铁、化工、石油化工和其他工业。
特种润滑剂
我们提供的产品包括完整的工业润滑产品，降低设备摩擦损耗，延长润滑周期，降低维护成本，而这种高性能要求采用传统的油脂是无法达到的。该系列产品能承受高载荷、粉尘或化学污染的环境、高低温和高速度要求。除了工业润滑油，道康宁公司还提供五大系列的特殊润滑油品，包括润滑脂、复合物、油膏、干摩润滑剂、分散剂等。
Molykote特种工业润滑油――更高质量、更高价值
Molykote工业润滑油产品由高纯度的基础油制成，因此具有极高的工作温度范围。这些油品在极高的工作条件也不会失效并表现如初，因此延长了换油周期，大大节约了维护的成本。而且比起传统矿物油，Molykote产品在使用中不会因油品的消耗产生大量的副产品,设备保持干净，免除了大量清洗维护的成本，延长了机械的使用寿命。
高性能工业润滑油
Molykote合成油是由聚合的分子构成，符合高性能所要求的纯度，专利的添加剂使性能更加卓越，使用寿命是传统矿物油的4－8倍。Molykote矿物油经过加氢裂解合成，使油品几乎不产生污染，使用寿命是传统矿物油的2－4倍。合成混合油（半合成油）由合成基础油和矿物基础油组成，使用寿命是传统矿物油的4－6倍。
齿轮箱油和链条油
Molykote齿轮箱油和链条油可以防止动力传输过程中的磨损和中断。与传统油品相比它具有更高的抗氧化性能和高温高压耐受性。Molykote齿轮箱油和链条油可以延长换油周期，在高工作温度范围内保持粘度特性不变。齿轮擦伤试样FZG 12+，AGMA9005。L-01XX(FG)工作温度范围-17－90。C，L-11XX(FG)工作温度范围-35－120。C，油水分离40/40/0(1)。
L-0460FG工作温度范围-17－120。C, L-1468FG工作温度范围-50－150。C, L-1428高温工作范围至235。C。
|
齿轮箱油 |
USDA |
ISO等级 |
100。F粘度 |
粘度指数 |
倾点(。F/。C) |
AGMA2# |
SAE# |
基础油 |
|
L-0115齿轮油—ISO150 |
H2 |
150 |
169.3 |
98 |
<10/-12.2 |
4 |
80-90 |
MO |
|
L-0115FG齿轮油—ISO150 |
H1 |
150 |
178.4 |
99 |
<20/-6.7 |
4 |
80-90 |
MO |
|
L-0122齿轮油—ISO220 |
H2 |
220 |
265.6 |
101 |
<15/-9.4 |
5 |
90 |
MO |
|
L-0122FG齿轮油—ISO220 |
H1 |
220 |
258.7 |
101 |
<20/-6.7 |
5 |
90 |
MO |
|
L-0132齿轮油—ISO320 |
H2 |
320 |
364 |
103 |
<10/-12.2 |
6 |
90-140 |
MO |
|
L-0146齿轮油—ISO460 |
H2 |
460 |
460 |
105 |
<10/-12.2 |
7 |
140 |
MO |
|
L-0146FG齿轮油—ISO460 |
H1 |
460 |
531 |
105 |
<10/-12.2 |
7 |
140 |
MO |
|
L-0168齿轮油—ISO680 |
H2 |
680 |
764 |
105 |
<-21/ |
8 |
140 |
MO |
|
L-1115合成齿轮油—ISO150 |
H2 |
150 |
181.4 |
99 |
<10/-12.2 |
4 |
80-90 |
PAO/MO |
|
L-1115FG合成齿轮油—ISO150 |
H1 |
150 |
163.3 |
131 |
<-35/-37.2 |
4 |
80-90 |
PAO/MO |
|
L-1122合成齿轮油—ISO220 |
H2 |
220 |
251.8 |
100 |
<10/-12.2 |
5 |
90 |
PAO/MO |
|
L-1122FG合成齿轮油—ISO220 |
H1 |
220 |
241.5 |
139 |
<-35/-37.2 |
5 |
90 |
PAO/MO |
|
L-1132合成齿轮油—ISO320 |
H2 |
320 |
388.6 |
126 |
<-30/-34.4 |
6 |
90-140 |
PAO |
|
L-1146合成齿轮油—ISO460 |
H2 |
460 |
512.4 |
154 |
<-30/-34.4 |
7 |
140 |
PAO |
|
L-1146FG齿轮油—ISO460 |
H1 |
460 |
428.3 |
152 |
<-35/-37.2 |
7 |
140 |
PAO |
|
L-1168齿轮油—ISO680 |
H2 |
680 |
772.1 |
128 |
<8/ |
8 |
140 |
PAO |
|
链条油 |
USDA |
ISO等级 |
100。F粘度 |
粘度指数 |
倾点(。F/。C) |
AGMA2# |
SAE# |
基础油 |
|
L-0460FG合成混合链条油 |
H1 |
68 |
73.9 |
100 |
<10/-12 |
_ |
30 |
MO |
|
L-1468FG合成冷冻链条油 |
H1 |
68 |
72.8 |
131 |
<-60/-51.1 |
_ |
30 |
PAO |
|
L-1428高温链条油 |
H2 |
285 |
327 |
110 |
<-15/ |
_ |
_ |
POE |
|
典型数据，不用于规格制定 |
|
H2标准即润滑油不可与食品直接接触 |
|
H1标准即润滑油可与食品偶然接触量不超过10ppm |
|
MO=矿物油, PAO=聚a烯烃, POE=多元醇酯 | | |
 |
Product Information
Industrial
Lubricants
Molykote L 0115
Gearbox and Chain Oils
FEATURES
• Lower overall maintenance costs
• Wider temperature range
• Longer oil-drain intervals
• Reduced lubricant consumption
• Extended equipment lifetime
• Reduced energy consumption
• Long life reduces lubricant usage,
maintenance cost
COMPOSITION
Hydroprocessed mineral oil (MO),
polyalphaolefin (PAO) and
polyalphaolefin/mineral oil
(PAO/MO) based lubricants.
DESCRIPTION
Molykote®
Gearbox and Chain Oils
help prevent wear and process
interruptions in power transmission
systems and components. Compared to
conventional oils, they also offer
greater resistance to oxidation and
stable performance at high
temperatures and under high loads.
Molykote Gearbox and Oils maximize
fill intervals and maintain viscosity
characteristics at wide temperature
ranges.
HOW TO USE
Follow equipment manufacturer’s
recommendations for maintenance
procedures and oil specifications.
To ensure the longest possible life
span for lubricating fluids, sample
analysis is recommended. When
utilized on a regular basis, sample
analysis can track normal aging and
depletion of antioxidants in lubricating
fluids. Moreover, sample analysis can
identify abnormal contamination that
may be limiting lubricant life. Contact
Dow Corning customer service for
additional information.
LISTING AND
SPECIFICATIONS
Molykote lubricating fluids are kosher
approved and conform to USDA
listing requirements under H-1 or H-2
designations (see Typical Properties
table). An H-1 designation indicates
the lubricated part can have incidental
food contact not to exceed 1 0 ppm.
An H-2 designation indicates the
lubricated part cannot have contact
with food.
HANDLING PRECAUTIONS
Product safety information required
for safe use is not included. Before
handling, read product and safety data
sheets and container labels for safe
use, physical and health hazard
information. The material safety data
sheet is available on the Dow Corning
website at dowcorning.com. You can
also obtain a copy from your local
Dow Corning sales representative or
Distributor or by calling your local
Dow Corning Global Connection.
USABLE LIFE AND
STORAGE
Molykote Gearbox and Chain Oils
have a shelf life of 60 months from
date of manufacture. Refer to product
packaging for use-by date.
PACKAGING
Molykote gearbox and chain lubricants
are available in 1 8.9- and 208.2-L (5-
and 55-gal) containers.
LIMITATIONS
These products are neither tested nor
represented as suitable for medical or
pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support Customers in their product
safety needs, Dow Corning has an
extensive Product Stewardship
organization and a team of Product
Safety and Regulatory Compliance
(PS&RC) specialists available in each
area.
For further information, please see our
website, dowcorning.com or consult
your local Dow Corning representative
PICAL PROPERTIES
Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow
Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
Molykote®
brand Product NSF
Viscosity@
40°C, cSt
Viscosity@
100°C, cSt
Viscosity@
100°F, cSt
Viscosity@
210°F, cSt
Viscosity
Index
Flash Point, °F
Fire Point, °F
Pour Point, °C
AGMA
2
#
Density@
20°C, g/mL
Density @
20°C lb/gal
SAE#
Base Oll
Additive
Package
L-0115 Gear Oil-ISO 150 H-23
149.4 14.8 169.3 15.2 100 500 530 -18 4 0.86 7.16 80-
90 MO R&O/AW
L-0115FG Gear Oil - ISO 150 H-14
150 15.4 170.1 15.9 100 500 530 -18 4 0.86 7.16 80-
90 MO R&O/AW
L-0122 Gear Oil - ISO 220 H-2 223 20.4 265.6 21 101 510 550 -18 5 0.86 7.16 90 MO R&O/AW
L-0122FG Gear Oil - ISO 220 H-1 219.1 20 249.7 20.7 101 490 510 -21 5 0.86 7.16 90 MO R&O/AW
L-0132 Gear Oil - ISO 320 H-2 312 31 349.5 31.6 134 460 515 -18 6 0.87 7.24 90-
140 MO R&O/AW
L-0146 Gear Oil - ISO 460 H-2 456.6 32.8 507.5 33.8 107 575 620 -18 7 0.87 7.24 140 MO R&O/AW
L-0146FG Gear Oil - ISO 460 H-1 441.1 33.1 507.5 34.2 107 575 620 -18 7 0.88 7.32 140 MO R&O/AW
L-1115 Synthetic Gear Oil - ISO
150 H-2 152 18 171 18 127 525 560 -48 4 0.87 7.24 80-
90 PAO R&O/AW
L-1115FG Synthetic Gear Oil -
ISO 150 H-1 149 17.4 167 17.8 129 510 560 -48 4 0.85 7.07 80-
90 PAO R&O/AW
L-1122 Synthetic Gear Oil – ISO
220 H-2 222 23 251.8 24 127 525 550 -39 5 0.87 7.24 90 PAO R&O/AW
L-1122FG Synthetic Gear Oil -
ISO 220 H-1 217 24 243 24.7 127 500 550 -39 5 0.85 7.07 90 PAO R&O/AW
L-1132 Synthetic Gear Oil - ISO
320 H-2 342.5 30.8 388.6 31.8 126 540 590 -39 6 0.85 7.07 90-
140 PAO R&O/AW
L-1132FG Synthetic Gear Oil -
ISO320 H-1 332 30.8 - - 129 490 530 -39 - 0.85 - - PAO R&O/AW
L-1146 Synthetic Gear Oil – ISO
460 H-2 455.2 45.1 512.4 46.5 147 545 595 -36 7 0.852 7.09 140 PAO R&O/AW
L-1146FG Synthetic Gear Oil –
ISO 460 H-1 460 39.2 517.3 40.4 152 545 595 -36 7 0.852 7.09 140 PAO R&O/AW
L-0168 Gear Oil – ISO 680 H-2 659 42 764 43 105 485 555 -21 8 0.88 7.32 140 MO R&O/AW
L-1168 Synthetic Gear Oil – ISO
680
H-2 674 48 772.1 51.2 128 505 580 -27 8 0.85 7.07 140 PAO R&O/AW
Chain Oils1
L-0460FG Blend Chain Oil -
H-1 66 8.3 73.9 8.6 100 465 480 -12 - 0.858 7.14 30 MO R&O/AW
(ISO 68) T/PPD
L-1468FG Synthetic H-1 65.8 9.8 72.8 10 131 520 565 -54 - 0.83 6.91 30 PAO R&O/AW
Freezer Chain Oil (ISO 68) T/PPD
L-1428 High Temperature H-2 285 24 327 26 110 470 572 -15 - 0.94 7.82 POE/PB R&O/AW
1
Typical values; not for use in preparing specifications.
2
AGMA is an acronym for American Gear Manufacturers Association.
3
The H-2 designation indicates the lubricated part cannot have contact with food.
4
The H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm
|
