深圳市汇通行润滑油有限公司
网站首页 关于我们 产品总汇 润滑油知识 工业油订购流程 在线订购 联系我们
快捷 高效 周到 贴心 全心全意为客户服务 销售热线:0755-27971019 传真:0755-27971089 手机:134 8078 1231李明
壳牌润滑油系列 > 壳牌(SHELL)航空润滑油脂 > SHELL AEROSHELL Grease 5、6、7、14、17、22、33、33MS
SHELL AEROSHELL Grease 5、6、7、14、17、22、33、33MS 详细说明 (浏览3218次)

AeroShell®
 GREASES
Premium military approved greases
for the aviation industry
Product Description
Shell offers a complete line of eight aviation greases designed to fill almost every lubrication need of the
aviation community. The product line consists of eight products each designed for specific applications. Six
of the Shell aviation greases are based on Microgel®, an inorganic thickening agent. The seventh grease is
soap type grease specifically designed to provide the unique lubricant requirements of helicopter main and tail
rotor bearings. The eighth grease is thickened with lithium complex soap and is approved against both
Boeing and military specifications.
Applications
Whenever an aircraft is certified, all of the lubricants are specified for each application point on the type
certificate. The type certificate will specify, either by military specification number or by specific product
names, those products, which are qualified to be used. The FAA regulations state that only products qualified
for specific applications can be used in certified aircraft. Therefore, in aviation it is the responsibility of the
aircraft owner or designated representative to determine which products should be used. Lubricant
recommendation charts for specific aircraft should be consulted, or the original airframe manufacturer should
be contacted for specific product recommendations.
The Products
• AeroShell Grease 5 is high temperature aircraft wheel bearing and engine accessory grease. It is made
with high viscosity base oil and a Microgel
 non-melting inorganic thickener, providing excellent load
carrying ability and resistance to water washout. It has a useful temperature range of -10° F (-23° C) to
+350° F (+177° C). This grease is increasingly being used in high temperature industrial applications,
such as drying ovens. AeroShell Grease 5 is qualified under the former MIL-G-3545C (obsolete)
specification.
• AeroShell Grease 6 is general-purpose airframe grease used primarily in plain and anti-friction bearings.
It is made with a Microgel
 inorganic thickener, which provides outstanding low temperature torque
properties and resistance to water. It has a useful temperature range of -40° F (-40° C) to +250° F
(+121° C). It is also used in other non-aviation applications requiring excellent low temperature
lubrication properties. AeroShell Grease 6 is qualified under MIL-G-24139A and MIL-G-7711A
(obsolete) specifications.
• AeroShell Grease 7 is low temperature multipurpose aviation grease recommended for instruments and
general airframe lubrication of turbine powered aircraft as well as highly loaded gears and actuator screw
mechanisms. It is made with synthetic diester base oil and a Microgel
 non-melting inorganic thickener,
which provides a useful temperature range of -100° F (-73° C), to +300° F (+149° C). AeroShell Grease
7 is qualified under the MIL-PRF-23827C specification.• AeroShell Grease 14 is the leading multipurpose helicopter grease used for most helicopter main and tail
rotor bearings (where specified). It is made with mineral base oil and a calcium soap thickener which
provides outstanding protection against moisture, corrosion & fretting. It has a useful temperature range
of -65° F (-54° C) to +200° F (+93° C). AeroShell Grease 14 is qualified under MIL-G-25537C
specification.
• AeroShell Grease 16 is a superior anti-friction bearing grease recommended for anti-friction bearings
operating under load at high speeds and high or low temperatures. It is made with a blend of synthetic
polyolester and mineral oil and Microgel non-melting inorganic thickener, which provides long life and
high water resistance. It has a useful temperature range of -65°F (-54°C) to +400°F (+204°C).
AeroShell Grease 16 is qualified under MIL-G-25760A (obsolete) and Boeing Materials Specification
BMS 3-24A.
• AeroShell Grease 17 is extreme pressure multipurpose grease recommended for heavily loaded sliding
steel surfaces where protection against seizure and corrosion is desired; e.g. bogie pivot pins on jet aircraft
landing gear assemblies. It is made with synthetic diester base oil, molybdenum disulfide and Microgel
non-melting inorganic thickener, which provides outstanding anti-friction bearing lubrication. It has a
useful temperature range of -100° F (-73° C) to +300° F (+149° C). AeroShell Grease 17 is qualified
under MIL-G-21164D specification.
• AeroShell Grease 22 is versatile multipurpose grease recommended for aircraft wheel bearings, engine
accessories and airframe lubrication, and for general anti-friction bearings operating at high speeds and at
high or low temperatures. It is made with synthetic base oil and Microgel
 non-melting inorganic
thickener, which provides excellent anti-wear properties and load carrying capacity. It has a useful
temperature range of -85° F (-65° C) to +400° F (+204° C). AeroShell Grease 22 is qualified under
MIL-PRF-81322F Grade 2 and DOD-G-24508A specifications.
• AeroShell Grease 33 is multipurpose airframe grease specifically developed for Boeing to be used in
roller bearings, actuator screws and other airframe equipment. It is made with synthetic base oil and a
Lithium Complex thickener, which provides enhanced corrosion resistance and load-carrying capacity. It
has a useful temperature range of -100° F (-73° C) to +250° F (+121° C). AeroShell Grease 33 is
qualified under MIL-PRF-23827C and Boeing Specification BMS 3-33A. Typical Properties of Shell Aeroshell Greases
Aeroshell Greases 5 6 7 14 16 17 22 33
Product Code 70025 70026 70149 70014 70016 70017 70022 70024
Thickener Microgel Microgel Microgel Calcium Microgel Microgel Microgel Lithium
complex
Oil Type Mineral Mineral Synthetic
Diester
Mineral Mineral/
Synthetic
Polyolester
Synthetic
Diester
Synthetic
Hydro-
carbon
Synthetic
Base Oil
Blend
Viscosity
 @ 100°C, cSt
 (ASTM D 445)
31.8 5.5 3.1 3.1 6.0 3.1 5.8 3.4
Useful Temp. Range, °F -10 to -40 to -100 to -65 to -65 to -100 to -85 to -100 to
+350 +250 +300 +200 +400 +300 +400 +250
Dropping Point, °F
(ASTM D2265)
500+ 500+ 500+ 300 500+ 500+ 500+ 420+
Penetration @ 77°F
 (ASTM D217)
 Unworked 281 287 283 267 290 287 271 290
 Worked 284 300 296 273 308 295 275 297
Evaporation in 22 hrs
 (ASTM D2595)
 Test Temperature, °F 300 250 210 210 350 210 350 250
 Loss, wt% 1.0 1.3 0.5 6.8 3.8 0.6 4.3 <10 (500hr)
Corrosion
 Copper Strip,
 24 hrs @ 212°F
 (ASTM D4048)
max 1b max 1b max 1b max 1b max 1b max 1b max 1b max 1b
 Anticorrosion
 (ASTM D1743) Pass Pass Pass Pass Pass Pass Pass Pass
Bomb Oxidation,
 @ 210°F
 (ASTM D942)
 Pressure Drop
 @ 100 hrs, psi 6 9 9 3 5 8 4 0.5
 @ 500 hrs, psi 15 15 14 6 10 15 10 5
table continued on page 4Typical Properties of Shell Aeroshell Greases (cont’d)
Aeroshell Greases 5 6 7 14 16 17 22 33
Product Code 70025 70026 70149 70014 70016 70017 70022 70024
Water Resistance
(ASTM D1264)
 Loss, %w, @100°F 0.5 2.0 0.8 7.2 1.8 1.0 0.5 <6
(@175°F)
Anti-friction Bearing Performance
(ASTM D3336)
 Temperature, °F 300 250 250 200 350 250 350 250
 Time, Hrs 600+ 2000+ 2460 1700+ 400+ 2850 400+ 1200+
Mean Hertz Load, Kg.
 (ASTM D2596)
37 33 60 --- 57 60 45 60
Oil Separation
 (FED-STD-791. 321)
 30 hrs @ 212°F, wt% 0.5 0.7 3.0 2.0 3.5 0.9 --- 2.0
 30 hrs @ 350°F, wt% --- ----- --- --- 4.3 --- 4.7 ---
Color Amber Brown Amber Tan Brown Gray Amber Kelly
Green
Qualified Under
Specifications
Former
MIL-G-
3545C (obs)
MIL-G-
24139A
MIL-PRF-
23827C
Type II
MIL-G-
25537C
Former
MIL-G-25760A
(obs);
BMS
3-24
MIL-G-21164D MIL-PRF-
81322F
Grade 2;
DOD-G-
24508A
MIL-PRF-
23827C
Type I;
BMS
3-33A
Handling & Safety Information
For information on the safe handling and use of this product, refer to its Material Safety Data Sheet at http://www.equivashellmsds.com. For more
information and availability, call 1+800-782-7852 or visit the World Wide Web: http://www.shell-lubricants.com/.

AEROSHELL Grease 5、6、7、14、17、22、33、33MS航空润滑脂

商品价格:
该商品未设定价格,您可以对供应商发出询价从而得到报价
供货总量:
350桶
  • 发货地点:上海
物流运费:
供货方式:现货(3天内发货)
型号:AEROSHELL Grease 5、6、7、14、17、22、33、33MS 品牌:AEROSHELL 倾点:-73(℃)
类别:航空润滑脂 温度类别:高温脂 应用范围:通用脂
稠化剂类别:微凝胶

AEROSHELL* GREASES
PREMIUM GREASES FOR AVIATION APPLICATIONS

 

PRODUCT LINE
AEROSHELL Grease 5 is a general aviation grease suitable for wheel bearings and high speed applications including magnetos, generators and starters operating in temperatures from –23℃to + 177℃.
AEROSHELL Grease 6 is a multi- purpose airframe grease for use in anti-friction bearings, gearboxes and plain bearings operating in temperatures between –40℃and +121℃.
AEROSHELL Grease 7 is a multi- purpose grease that may be used on turbine engined aircraft. It is an advanced grease designed to cover a wide temperature range from –73℃to + 149℃.
AEROSHELL Grease 14 is designed for greasing applications on helicopters including main and tail rotor bearings, and splines. It has outstanding anti-fret properties and it may used over the temperature range from –54℃to +93℃.
AEROSHELL Grease 17 is a fully synthetic grease containing 5% molybdenum disulphide. It is particularly suitable for lubricating heavity loaded sliding surfaces such as bogie pins on aircraft landing gear assemblies over the temperature range of -73℃to +149℃.
AEROSHELL Grease 22 is a fully synthetic grease designed for severe operating conditions including high bearing loads, high speeds and where long grease retention and high water resistance are required.
AEROSHELL Grease 22 covers the operating temperature from –65℃to + 204℃.
AEROSHELL Grease 33 is our newest generation multi-purpose synthetic grease. It is specifically designed to lubricate a wide range of applications and operating conditions on commercial aircraft. It is approved for Boeing’s BMS 3-33 specification and it covers the operating temperature range between –73℃and +121℃.
AEROSHELL Grease 33MS shares the same advanced grease technology AeroShell Grease 33, AeroShell Grease 33MS also possesses the extreme pressure (EP) characteristics provided by molybdenum disulphide. This grease contains a synthetic oil and must not be used with incompatible seal materials.

 

PERFORMANCE BENEFITS
AEROSHELL greases have been developed for a wide variety of aircraft lubrication applications. Shell’s innovative Microgel* thickener technology is used in several AEROSHELL greases to provide greases without the temperature limitations imposed by soap type thickeners. Microgel thickened greases also exhibit excellent load carrying ability and maintain consistency with variations in temperature. These factors help to make Microgel greases particularly suitable for a range of multi-purpose applications commonly found on aircraft. The multi-purpose features of many of the AEROSHELL greases enable users to lubricate their aircraft with fewer greases thus reducing inventory costs and minimizing the risk of misapplication of the wrong grease.

 

APPROVALS
AEROSHELL Grease 5          MIL-G-3545 (obsolete)
AEROSHELL Grease 6          MIL-G-24139
AEROSHELL Grease 7          MIL-PRF-23827
AEROSHELL Grease 14        MIL-G-25537
AEROSHELL Grease 17        MIL-G-21164
AEROSHELL Grease 22        MIL-PRF-81322F
AEROSHELL Grease 33        MIL-PRF-23827 ,BMS 3-33
AEROSHELL Grease 33MS    MIL-G-21164D

 

TYPICAL PROPERTIES



包装规格:
Aeroshell Grease 5         4X3KG/CTN
Aeroshell Grease 6         4X3KG/CTN
Aeroshell Grease 7         4X3KG/CTN
Aeroshell Grease 14       4X3KG/CTN
AeroShell Grease 15       4X3KG/CTN 15.875KG/PAIL
Aeroshell Grease 22       4X3KG/CTN
Aeroshell Grease 33       4X3KG/CTN
Aeroshell Grease 33MS  4X3KG/CTN
Aeroshell Grease 33MS  17KG/PAIL?

上一产品: SHELLSOL A100
版权所有:深圳市汇通行润滑油有限公司 网站备案:粤ICP备16124526号 网址:www.hthrhy.com 邮箱:hthrhy@126.com
电话:0755-27971019 传真:0755-27971089 手机:134 8078 1231李明 地址:深圳市南山区科技园高新南一路中科大夏