深圳市汇通行润滑油有限公司
网站首页 关于我们 产品总汇 润滑油知识 工业油订购流程 在线订购 联系我们
快捷 高效 周到 贴心 全心全意为客户服务 销售热线:0755-27971019 传真:0755-27971089 手机:134 8078 1231李明
美孚润滑油系列 > 润滑脂 > Mobil Chassis Grease LBZ/美孚润滑脂底盘LBZ
Mobil Chassis Grease LBZ/美孚润滑脂底盘LBZ 详细说明 (浏览1361次)

美孚润滑脂底盘LBZ

汽车用润滑脂

产品描述

LBZ美孚底盘润滑脂是一种半流体润滑脂,合成油的基础上的一致性组NLGI 00。它是专门开发用于商用车辆的中央润滑系统。该产品中含有的抗氧化剂,腐蚀抑制剂,极压和抗磨损添加剂。由于其特殊的配方和半流质的一致性底盘润滑脂,美孚LBZ即使在非常低的温度下表现出优异的流动和在长pipelinesThe油膜附着良好,不流失,即使在停工。有快速流润滑点。良好的保护作用,防止生锈,还涵盖了使用机箱上的润滑点'传播'盐和相关的危险生锈。美孚底盘润滑脂LBZ NBR,ACM,FKM,只要这些适合的工作温度与密封件相容。

 

特点和优点

特点 优点及潜在效益
集中系统中的泵送性好,即使在低温下 潜在的合理化到一个产品
集中润滑系统设计 降低运营成本相比,由于较低的维护成本和经济使用手工润滑
在重负荷或冲击负荷和振动,降低了磨损。出色的抗磨损性能   良好的设备的可靠性和可用性
良好的防锈和防腐蚀保护和抗水淋 增强设备的保护和良好的润滑作用,即使在有水存在
控制放油 平衡的润滑性能,延长了使用寿命

 

应用

埃克森美孚推荐使用于:

中央润滑系统使用半流体润滑脂商业车辆-50°C和100°C  以下厂家的半流体润滑脂系统:

  • 威利·沃格尔AG,柏林(-25°C)
  • 梅赛德斯 - 奔驰(表264.0半流体润滑脂)。

 

规格与认可

美孚底盘润滑脂LBZ有以下制造商认可  
梅赛德斯 - 奔驰 表264.0
MAN MAN 283李-P 0/000

 

典型属性

美孚润滑脂底盘LBZ  
NLGI等级 00
基础油粘度40°C,ASTM D 445,CST 40
稠化剂类型
颜色 绿色
工作锥入度,25ºC,ASTM D 217 400-430
滴点,C,D 2265 > 160
四球焊接负荷,N,DIN 51350-4 800
防腐蚀保护,埃姆科,ISO 11007 0-0
流量压力测试@ -35℃,百帕,DIN 51805 60
温度范围,连续运行 -40°C至+100°C

 

健康与安全

根据现有资料显示,该产品预计不会对健康产生不利影响,使用时的用途和材料安全数据表(MSDS)中提供的建议遵循。MSDS可根据要求通过您的销售联络办事处,或通过互联网。此产品不应该被用于其拟定用途以外的其他用途。如果处理用过的产品,照顾,以保护环境。


美孚字型,飞马设计和底盘润滑脂美孚LBZ是埃克森美孚公司或其子公司之一,其附属公司的注册商标。 

5-2011 

版权所有©2001-2013埃克森美孚公司。保留所有权利。

Mobil Chassis Grease LBZ

Automotive Grease

Product Description

Mobil Chassis Grease LBZ is a semi-fluid grease based on synthetic oils in the consistency group NLGI 00. It was specifically developed for central lubrication systems for commercial vehicles. The product contains anti-oxidants, corrosion inhibitors, extreme pressure and anti-wear additives. Due to its special formulation and semi-fluid consistency, Mobil Chassis Grease LBZ exhibits excellent flow even at very low temperatures and in long pipelinesThe oil film adheres well and does not run off, even during stoppages. There is rapid on-flow to the greasing points. The good protection against rust also covers the use of ‘spreading’ salt and the related danger of rust on the lubrication points of the chassis. Mobil Chassis Grease LBZ is compatible with seals made of NBR, ACM and FKM, as long as these are suitable for the operating temperatures.

 

Features and Benefits

Features Advantages and Potential Benefits
Good pumpability in centralised systems even at low temperatures Potential to rationalise onto one product
Designed for centralised lubrication systems Reduced operating costs compared to greasing by hand due to lower maintenance costs and economic usage
Reduced wear under heavy or shock loading and vibration. Excellent anti-wear performance   Good equipment reliability and availability
Good protection against rust and corrosion and resistance to water washout Enhanced equipment protection and good lubrication even in presence of water
Controlled oil release Balanced lubrication properties for longer service life

 

Applications

Recommended by ExxonMobil for use in:

Central lubrication systems using semi-fluid greases in commercial vehicles–50°C and 100°C 

The semi-fluid grease systems of the following manufacturers:

  • Willie Vogel AG, Berlin (to -25°C )
  • Mercedes Benz (Sheet 264.0 Semi-Fluid Greases).

 

Specifications and Approvals

Mobil Chassis Grease LBZ has the following builder approvals  
Mercedes Benz Sheet 264.0
MAN MAN 283 Li-P 0/000

 

Typical Properties

Mobil Chassis Grease LBZ  
NLGI Grade 00
Base Oil Viscosity @ 40°C, cSt, ASTM D 445 40
Thickener Type Lithium
Colour Green
Penetration, Worked, 25 ºC, ASTM D 217 400-430
Dropping Point, D 2265, C ›160
4-Ball Weld Load, N, DIN 51350-4 800
Corrosion protection, EMCOR, ISO 11007 0-0
Flow Pressure Test @ -35°C, hPa, DIN 51805 60
Temperature range, continuous operation -40°C to +100°C

 

Health and Safety

Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contact office, or via the internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.


The Mobil logotype, the Pegasus design and Mobil Chassis Grease LBZ are trademarks of ExxonMobil Corporation, or one of its subsidiaries. 

5-2011 

Copyright © 2001-2013 Exxon Mobil Corporation. All rights reserved.

   

   

上一产品: CASTROL LONGTIME PD0/CASTROL LONGTIME PD 0/CASTROL LONGTIMEPD0
下一产品: Mobilgrease GC 40美孚GC 40
版权所有:深圳市汇通行润滑油有限公司 网站备案:粤ICP备16124526号 网址:www.hthrhy.com 邮箱:hthrhy@126.com
电话:0755-27971019 传真:0755-27971089 手机:134 8078 1231李明 地址:深圳市南山区科技园高新南一路中科大夏