美孚车用齿轮油HD-A +等级80W-90

汽车齿轮润滑油

产品描述

美孚车用HD-A +等级80W-90是专为在极端的压力和冲击负荷的预期，埃克森美孚推荐API GL-5需要服务的应用程序的商业变速箱，车桥，终传动。它高性能基础油和先进的添加剂系统配制而成。这种润滑剂是一种重型齿轮润滑油，主要是在奔驰车桥允许延长换油周期。

特点和优点

今天的重型设备对传动系统润滑油的性能要求更高。更高的速度，更高的扭矩，负载较重需要改进配方，以最大限度地提高设备的使用寿命，降低运营成本。较长的维修间隔放置额外的要求，对齿轮润滑油，需要有效的基础油和添加剂系统。美孚车用齿轮油HD-A加80W-90齿轮润滑剂被设计来应对这些挑战。关键的好处包括：

特点	优点及潜在效益
优良的热稳定性和抗高温氧化	齿轮与轴承寿命长，由于最小的存款。密封寿命长。
尤其是在加强保护防止低速/高扭矩磨损及高速刮伤重仓后轴	提高承载能力，降低维护成本，延长设备寿命
有效的防锈和防腐蚀保护	减少磨损和更长的组件寿命
多用途能力	数量减少所需的齿轮润滑油
与典型的汽车密封件和垫圈兼容	最低泄漏和减少污染
扩展的排水能力	提高生产力和降低运营成本

应用

埃克森美孚推荐使用于：

重型汽车手动变速器，车轴，和最终的驱动器要求API GL-5级别的性能
公路上汽车和轻型卡车，重型商用车
关公路行业包括：建筑，采矿，采石和农业
其他变速箱，转向器及可变齿轮箱
其他重型工业和汽车应用，涉及经营的准双曲面齿轮的条件下，在高速/冲击负荷，高速/低扭矩和/或低速/高扭矩为准

规格与认可

美孚车用齿轮油HD-A Plus具有以下制造商认可：	80W-90
235.20 MB审批	X
MAN 342典型M3	X
ZF TE-ML 05A，12E，16B，17B，19B，21A	X

美孚车用齿轮油HD-A +等级达到或超过以下行业与制造商规格的要求：
API GL-5	X
斯堪尼亚STO 1:0	X
ZF TE-ML 07A	X

典型属性

美孚车用齿轮油HD-A +等级80W-90
SAE等级	80W-90
粘度，ASTM D 445
CST @ 40ºC	131
CST @ 100℃	14.3
粘度指数，ASTM D 2270	105
倾点，ºC，ASTM D 97	-33
闪点，ºC，ASTM D 92	222
密度@ 15°C，ASTM D 4052公斤/升	0.901

健康与安全

根据现有资料显示，该产品预计不会对健康产生不利影响，使用时的用途和材料安全数据表（MSDS）中提供的建议遵循。MSDS可根据要求通过您的销售的合同办公室或通过互联网，或将要由卖方提供给客户，如果法律要求。此产品不应该被用于其拟定用途以外的其他用途。如果处理用过的产品，照顾，以保护环境。

美孚字型，飞马图样及美孚车是埃克森美孚公司或其子公司之一，其附属公司的注册商标。

3-2013

美孚润滑剂和特种欧洲，埃克森美孚石油化工BVBA分工。
此信息仅涉及在欧洲（包括土耳其）和前苏联提供的产品。美孚润滑剂和特种欧洲，埃克森美孚石油化工的一个部门，BVBA（EMPC的） POLDERDIJKWEG B-2030 比利时安特卫普

典型性质是典型的获得正常生产公差，并不构成一个规范。在正常生产过程中，在不同的调配是可以预期的变动，并不影响产品性能。此处包含的信息如有变更，恕不另行通知。可能并非所有产品均在当地有售。欲了解更多信息，请联系您当地的埃克森美孚接触或访问www.exxonmobil.com
埃克森美孚公司是由众多的子公司和附属公司，包括埃索，美孚，埃克森美孚公司的名称。本文档中的任何内容都不是为了覆盖或取代地方实体的公司的独立性。地方行动和问责的责任仍然与当地埃克森美孚附属实体。

Mobilube HD-A Plus 80W-90

Automotive Gear Lubricant

Product Description

Mobilube HD-A Plus 80W-90 is engineered for commercial transmissions, axles, and final drives where extreme pressures and shock loading are expected and is recommended by ExxonMobil for applications where API GL-5 service is required. It is formulated from high performance base oils and an advanced additive system. This lubricant is a heavy duty gear lubricant allowing extended oil drain intervals predominantly in Mercedes Benz axles.

Features and Benefits

Today's heavy equipment applications place higher performance demands on drive-train lubricants. Higher speeds, higher torque, and heavier loads require improved formulations to maximise equipment life and minimise operating costs. Longer service intervals place additional demands on the gear lubricant requiring effective basestock and additive systems. Mobilube HD-A Plus 80W-90 gear lubricant is engineered to address these challenges. The key benefits include:

Features	Advantages and Potential Benefits
Excellent thermal stability and resistance to high temperature oxidation	Long gear and bearing life due to minimal deposits. Long seal life.
Enhanced protection against low speed/high torque wear and against high speed scoring especially in heavily loaded rear axles	Increased load carrying capability Reduced maintenance costs and longer equipment life
Effective rust and corrosion protection	Reduced wear and longer component life
Multipurpose capability	Reduced number of gear lubricants required
Compatible with typical automotive seals and gaskets	Minimum leakage and reduced contamination
Extended drain capability	Increased productivity and reduced operating costs

Applications

Recommended by ExxonMobil for use in:

Heavy duty automotive manual transmissions, axles, and final drives requiring API GL-5 level performance
On highway cars and light trucks; heavy duty commercial vehicles
Off highway industries including: construction, mining, quarrying, and agriculture
Other gearboxes, steering gears and variable gearboxes
Other heavy duty industrial and automotive applications involving hypoid gears operating under conditions where high speed/shock load, high speed/low torque, and/or low speed/high torque prevail

Specifications and Approvals

Mobilube HD-A Plus has the following builder approvals:	80W-90
MB-Approval 235.20	X
MAN 342 Typ M3	X
ZF TE-ML 05A, 12E, 16B, 17B, 19B, 21A	X

Mobilube HD-A Plus meets or exceeds the requirements of the following industry and builder specifications:
API GL-5	X
SCANIA STO 1:0	X
ZF TE-ML 07A	X

Typical Properties

Mobilube HD-A Plus 80W-90
SAE Grade	80W-90
Viscosity, ASTM D 445
cSt @ 40ºC	131
cSt @ 100ºC	14.3
Viscosity Index, ASTM D 2270	105
Pour Point, ºC, ASTM D 97	-33
Flash Point, ºC, ASTM D 92	222
Density @ 15°C kg/l, ASTM D 4052	0.901

Health and Safety

Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office or via the Internet, or will be provided by seller to customers if and as legally required. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.

The Mobil logotype, the Pegasus design and Mobilube are trademarks of Exxon Mobil Corporation, or one of its subsidiaries.

3-2013

ExxonMobil Lubricants & Specialties Europe, division of ExxonMobil Petroleum & Chemicals BVBA.
This information relates only to products supplied in Europe (including Turkey) and the Former Soviet Union.

EXXONMOBIL LUBRICANTS & SPECIALTIES EUROPE, A DIVISION OF EXXONMOBIL PETROLEUM & CHEMICAL, BVBA (EMPC)
POLDERDIJKWEG
B-2030 Antwerpen
Belgium

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification. Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations. The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.